797 and 797B Off-Highway Truck Caterpillar


Hoist System Enable - Check

Usage:

797 5YW
The hoist system function is intended to allow the service technician to tell the ECM the desired state of the hoist system. The hoist system function may be changed with the Caterpillar Electronic Technician.

The allowed states for the hoist system function are listed:

"Not installed" - This would be the state if the hoist system was not installed on the machine. An example would be a machine that is used for a water wagon. The ECM does not control the hoist valve.

Enabled - This would be the state of a normally operating machine with a hoist system.

Disabled - This would be the state of the machine when the hoist system has been locked in hold. An example would be a machine that was shipped without a bed.

If the hoist system does not work, verify that the hoist system is enabled. Use the display for the configuration parameter through the service menu in the Caterpillar Electronic Technician.

Caterpillar Information System:

784C and 785C Off-Highway Truck/Tractors Air System and Brakes Bypass Switch (Parking Brake Release Hydraulic Filter)
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0110 - FMI 04
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 1675 - FMI 05
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Transmission Control (Shift Lever) - Test
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 1674 - FMI 05
2002/09/30 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems Pilot Oil Filter and Relief Valve
2002/09/30 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front and Rear) - Assemble" {3256, 3258}
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement Fan Guard - Remove and Install
797 and 797B Off-Highway Truck Power Train Electronic Control System MID 081 - CID 1326 - FMI 02
R1600 Load Haul Dump Machine Electrical System Autoshift Control (Wheel Steering)
R1600 Load Haul Dump Machine Electrical System Attachment System
143H and 163H Motor Graders All Wheel Drive Electrical Schematic
R2900 Load Haul Dump General Torque Information
2002/08/05 A Special Instruction, REHS1378, "Replacement Instructions for the P2 Pressure Sensor on D250E Series II and D300E Series II Articulated Trucks" Is Available {1435}
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Piston Pump (Fan Drive) - Install
2002/08/05 A Special Instruction, REHS1314, "Replacement Instructions for the P2 Pressure Sensor on D250E and D300E Articulated Trucks" Is Available {1435}
143H and 163H Motor Graders All Wheel Drive Electrical Input Components
797 Off-Highway Truck Hydraulic System Screen (Hoist)
2002/08/26 VIMS Service Port Information {7601}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Connecting Rod - Inspect
143H and 163H Motor Graders All Wheel Drive Electrical Output Components
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Air Control Valve (Service Brake)
PS-360B Paving Compactor Safety Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.