Correction to Operation and Maintenance Manual , "Engine Oil and Filter (CF-4 Multigrade) - Change - 3516B Standard Displacement Engine Only" {1318}
- Off-Highway Truck:
- 793C (S/N: ATY1-UP; 4GZ1-UP)
The API CF-4 oils have been removed from the list of approved oil for the 3500 Series diesel engines. Remove the section that is called "Engine Oil and Filter (CF-4 Multigrade) - Change - 3516B Engine Standard Displacement Engine Only" from the Operation and Maintenance Manual.
Note: Remove "Engine Oil and Filter (CF-4 Multigrade) - Change - 3516B Engine Standard Displacement Engine Only" from the Maintenance Interval Schedule.
Caterpillar Information System:
D5N Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
3406E and C15 Marine Engines Turbocharger - Inspect
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Gear Pump (Charge, Steering, Offset and Wheel Tilt)
CB-434C Vibratory Compactor Fuel System - Prime
Flexxaire Fan Hydraulic Actuated Fan - Disassemble
D5N Track-Type Tractor Power Train Pressure Charts
R1700G Load Haul Dump Implement and Steering Lockout (Wheel Steering) - Test
R1700G Load Haul Dump Implement and Steering Lockout (STIC Steering) - Test
R1700G Load Haul Dump Hydraulic Tank Breaker Relief Valve - Clean
2002/07/22 Correction to Operation and Maintenance Manual , "Engine Oil and Filter (CF-4 Multigrade) - Change" {1318}
R1700G Load Haul Dump Hydraulic System Oil Level - Check
R1700G Load Haul Dump Hydraulic System Oil Filter - Replace
2002/07/22 Correction to Operation and Maintenance Manual , "Engine Oil and Filter - Change" {1318}
3056E Engine for Caterpillar Built Machines Flywheel - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Relief Valve
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System Hydraulic Tank and Filter
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Timing - Check
2002/07/22 Correction to Operation and Maintenance Manual , "Lubricant Specifications" {1000, 1300, 7000, 7581}
143H and 163H Motor Graders All Wheel Drive Location of Hydraulic Components
Flexxaire Fan Hydraulic Actuated Fan - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System Piston Pump (Steering)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Hydraulic Oil Contamination - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders Engine Temperature Sensor Open or Short Circuit - Test
TH210 and TH215 Telehandlers Engine Supplement Alternator - Remove and Install