Engine Oil Bypass Valve - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Install plunger (12), spring (11), seat (10), and retaining ring (9) into housing (13).
Show/hide table
Illustration 2 g00905800 - Install the engine oil bypass valve (8). Install bolt (7).
- Install tube assembly (5) to engine oil bypass valve (8). Install bolt (6).
- Install socket head bolts (4).
Show/hide table
Illustration 3 g00905801 - Install the oil suction screen and tube assembly (2). Install bolts (3) that hold the oil suction screen and tube assembly (2).
- Install the nut and bolt (1) on the bracket.
Show/hide table
Illustration 1 | g00905802 |
End By:
- Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar Information System:
TH210 and TH215 Telehandlers Power Train Hydraulic Oil Contamination - Test
R1700G Load Haul Dump Fuel System Water Separator - Drain
R1700G Load Haul Dump Fuel System Secondary Filter - Replace
3054E Industrial Engine Camshaft
R1700G Load Haul Dump Fuel System Primary Filter - Clean/Replace
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Hydraulic Fan System
R1700G Load Haul Dump Fuel System - Prime
R1600G Load Haul Dump Braking System Brake Release Cylinder
R1600G Load Haul Dump Braking System Sequence Valve (Brake Release)
R1600G Load Haul Dump Braking System Limit Switch (Stop Light) - Adjust
R1600 Load Haul Dump Machine Electrical System Main Power Relay
3054E Industrial Engine Water Temperature Regulator
R1700G Load Haul Dump Fuel Tank Cap and Strainer - Clean
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train MID 081 - CID 0562 - FMI 09
R1700G Load Haul Dump Fuel Tank Water and Sediment - Drain
R1700G Load Haul Dump Fuses - Replace
R1700G Load Haul Dump Hydraulic System Oil - Change
R1700G Load Haul Dump Hydraulic System Oil Filter - Replace
R1700G Load Haul Dump Hydraulic System Oil Level - Check
2002/07/22 Correction to Operation and Maintenance Manual , "Engine Oil and Filter (CF-4 Multigrade) - Change" {1318}
R1700G Load Haul Dump Hydraulic Tank Breaker Relief Valve - Clean
R1700G Load Haul Dump Implement and Steering Lockout (STIC Steering) - Test
R1700G Load Haul Dump Implement and Steering Lockout (Wheel Steering) - Test
D5N Track-Type Tractor Power Train Pressure Charts