Engine Air Filter Secondary Element - Replace
Show/hide table
NOTICE |
---|
Always replace the secondary filter element. Never attempt to reuse it by cleaning. The secondary filter element should be replaced at the time the primary element is serviced for the third time. The secondary filter element should also be replaced if the yellow piston in the filter element indicator enters the red zone after installation of a clean primary element, or if the exhaust smoke is still black. |
- Open the engine compartment.
- Remove the air cleaner housing cover.
Show/hide table
Illustration 1 | g00889659 |
- Remove the primary filter element from the air cleaner housing.
Show/hide table
Illustration 2 | g00889660 |
- Remove the secondary filter element.
Show/hide table
Illustration 3 | g00889672 |
- Cover the air inlet opening. Clean the inside of the air cleaner housing.
Show/hide table
Illustration 4 | g00889673 |
- Uncover the air inlet opening. Install a new secondary element.
- Install the primary element and the air cleaner housing cover.
- Reset the filter element indicator.
Show/hide table
Illustration 5 | g00889674 |
- Close the engine compartment.
Caterpillar Information System:
793C XQ Off-Highway Truck Service Brakes - Inspect
PM-465 Cold Planer Power Take-Off Clutch Oil Level - Check
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Rear Window Defroster Circuit
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Engine Starting Circuit
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Charging Circuit
R1600G Load Haul Dump Hydraulic System Ejector Cylinder
R1700G Load Haul Dump Operator Mode Scroll Switch
Comfort Series Seat For Caterpillar Machines Comfort Seat Air Suspension with Air Compressor - Disassemble
R1700G Load Haul Dump Lift Arm Positioner Switch
Comfort Series Seat For Caterpillar Machines Comfort Seat Air Suspension with Air Compressor - Assemble
C-12, C-15 and C-16 Engines for Caterpillar Built Machines E039 Low Engine Oil Pressure Derate
533 and 543 Wheel Feller Bunchers Power Train Piston Motor (Propel) - Assemble
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Main Control Valve (Two Function)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders General Information
3056E Industrial Engine Air Inlet and Exhaust System
CB-434C Vibratory Compactor Belts - Inspect/Adjust/Replace
2002/07/01 Correction to Systems Operation , "Service Brake" {4251}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Track Roller - Remove
R1700G Load Haul Dump Horn
2002/06/17 New Service Information Tool for CAT Dealers is Now Available {1900}
C-12, C-15 and C-16 Engines for Caterpillar Built Machines E017 High Engine Coolant Temperature Warning
R1700G Load Haul Dump Service Ports
R1700G Load Haul Dump Backup Alarm
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Control Valve (Tilt)