Ejector Cylinder
Show/hide table
 | |
| 图 1 | g01413720 |
(1) (3) (7) 组装之前，将 7M-7456 轴承安装固定胶 涂敷在刮油密封凹槽上。
(2) (5) 用少许所要密封的润滑剂润滑密封唇。
(4) 装配前，先后将 169-5464 快速固化底漆 和 9S-3263 螺纹固定剂 涂抹到螺母的螺纹上。 拧紧螺母至扭矩为 ... 1600 ± 160 N·m (1180 ± 118 lb ft)
(6) 将垫圈的平面侧朝向连杆组件安装。
(8) 新油缸管的孔径 ... 114.35 ± 0.10 mm (4.502 ± 0.004 in)
(9) 新连杆的直径 ... 50.75 ± 0.038 mm (1.998 ± 0.0015 in)
(10) 新油缸盖的孔径 ... 51.08 ± 0.03 mm (2.011 ± 0.001 in)
(11) 装配前，先后将 169-5464 快速固化底漆 和 155-0695 螺纹固定剂 涂抹到四颗螺栓的螺纹上。 拧紧四颗螺栓至扭矩为 ... 240 ± 40 N·m (180 ± 29 lb ft)
Caterpillar Information System:
R1700G Load Haul Dump Operator Mode Scroll Switch
Comfort Series Seat For Caterpillar Machines Comfort Seat Air Suspension with Air Compressor - Disassemble
R1700G Load Haul Dump Lift Arm Positioner Switch
Comfort Series Seat For Caterpillar Machines Comfort Seat Air Suspension with Air Compressor - Assemble
C-12, C-15 and C-16 Engines for Caterpillar Built Machines E039 Low Engine Oil Pressure Derate
533 and 543 Wheel Feller Bunchers Power Train Piston Motor (Propel) - Assemble
R1700G Load Haul Dump Remote Control Switch - If Equipped
533 and 543 Wheel Feller Bunchers Power Train Piston Motor (Propel) - Disassemble
CB-434C Vibratory Compactor Articulating and Oscillating Bearings - Lubricate
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Steering System Piston Pump (Steering and Pilot) Margin Pressure - Test and Adjust
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Steering System Piston Pump (Steering and Pilot) High Pressure Stall - Test and Adjust
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Steering System Piston Pump (Steering and Pilot) Low Pressure Standby - Test and Adjust
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Charging Circuit
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Engine Starting Circuit
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Rear Window Defroster Circuit
PM-465 Cold Planer Power Take-Off Clutch Oil Level - Check
793C XQ Off-Highway Truck Service Brakes - Inspect
CP-433E, CS-423E and CS-433E Paving Compactors Engine Air Filter Secondary Element - Replace
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System Main Control Valve (Two Function)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders General Information
3056E Industrial Engine Air Inlet and Exhaust System
CB-434C Vibratory Compactor Belts - Inspect/Adjust/Replace
2002/07/01 Correction to Systems Operation , "Service Brake" {4251}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Track Roller - Remove