CB-434C Vibratory Compactor Caterpillar


Water Spray Control

Usage:

CB-434C 4DN



Illustration 1g00895265

The gauges for the water tank are found on both the front water tank and the rear water tank.


NOTICE

Always check the water level in the water tanks before you use the water spray system.

Contaminated water in the water tanks can cause performance problems and reliability problems in the water spray system.





Illustration 2g00571109

Switch (1) controls the intermittent operation and the continuous operation of the water spray system.


Intermittent Spray - Move the switch (1) forward in order to activate the intermittent water spray system.

OFF - Move the switch (1) to the center position in order to turn the water spray system OFF.


Continuous Spray - Move the switch (1) rearward in order to activate the continuous water spray system.

The Selector Switch for the Water Tank

Switch (2) controls the use of water from the front tank or the rear tank.

Front tank - In order to use water from the front tank, move the switch (2) forward.

Rear tank - In order to use water from the rear tank, move the switch (2) rearward.

Note: When one tank is empty, switch tanks and use the water from the other tank.

Caterpillar Information System:

120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Hydraulic Tank and Filter
730 EJECTOR and 740 EJECTOR Articulated Trucks Ejector Blade Pitch Rollers - Install
730 EJECTOR and 740 EJECTOR Articulated Trucks Ejector Blade Pitch Rollers - Remove
R1600G Load Haul Dump Hydraulic System Relief Valve (Lift Circuit)
R1600 Load Haul Dump Hydraulic System Relief Valve (Line)
2002/06/10 The Implement Control Valve Has Been Improved {5051}
R1600G Load Haul Dump Hydraulic System Relief Valve (Main)
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Refrigerant Condenser - Remove and Install
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 0254 - FMI 12
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 1231 - FMI 05
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0826 - FMI 04
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0826 - FMI 03
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0070 - FMI 03
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0070 - FMI 04
CB-434C Vibratory Compactor Steering Control
793C XQ Off-Highway Truck Access Doors and Covers
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 0672 - FMI 02
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 0190 - FMI 02
2002/06/24 A 30 Inch Auger Bit Is Now Available {6819, 6830, 7000}
PS-150B and PS-200B Paving Compactors Cooling System Coolant Extender (ELC) - Add
3046 Engine for Caterpillar Built Machines Piston Height - Inspect
Flexxaire Fan Setup
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0367 - FMI 02
PS-150B and PS-200B Paving Compactors Cooling System Coolant (ELC) - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.