Illustration 1 | g01121364 |
Cylinder stroke ... 208 mm (8.2 inch)
(1) Torque setting for self-locking nut ... 1200 ± 120 N·m (885 ± 85 lb ft)
Lubricate the threads of self-locking nut (1) with clean grease.
(2) Diameter of piston ... 99.55 ± 0.03 mm (3.9193 ± 0.0012 inch)
(3) Bore of cylinder ... 110 ± 0.08 mm (4.3307 ± 0.0031 inch)
(4) Diameter of piston rod ... 44.400 ± 0.038 mm (1.7480 ± 0.0015 inch)
(5) Bore of the head ... 44.78 ± 0.03 mm (1.7630 ± 0.0012 inch)
(6) Torque setting for the head ... 600 ± 130 N·m (445 ± 95 lb ft)
Lubricate the threads of the head with clean grease.
Apply sealant to wiper seal groove (7) prior to assembly.
Note: Lubricate all of the seals with the lubricant that is being sealed.
(8) 193-3865 Bearing
- Diameter ... 89.9925 ± 0.0075 mm (3.5430 ± 0.0003 inch)
- Bore ... 59.9925 ± 0.0075 mm (2.3619 ± 0.0003 inch)
Note: Secure the bearing with 185-3994 Bearing Mount Compound.