Illustration 1 | g01121547 |
Cylinder stroke ... 1951 mm (76.81 inch)
(1) Torque setting for self-locking nut ... 6500 ± 500 N·m (4795 ± 370 lb ft)
Lubricate the threads of the self-locking nut with clean grease.
(2) Diameter of piston ... 132.85 ± 0.03 mm (5.2303 ± 0.0012 inch)
(3) Bore of cylinder ... 133.35 ± 0.08 mm (5.250 ± 0.0031 inch)
(4) Diameter of piston rod ... 101.55 ± 0.038 mm (3.998 ± 0.0015 inch)
(5) Bore of head ... 101.93 ± 0.03 mm (4.013 ± 0.0012 inch)
(6) Torque setting for the head ... 600 ± 130 N·m (440 ± 95 lb ft)
Lubricate the threads of the head with clean grease.
Apply sealant to wiper seal groove (7) prior to assembly.
Note: Lubricate all seals with clean lubricant that is being sealed.
(8) 204-7308 Sleeve Bearing
- outside diameter ... 73.165 ± 0.025 mm (2.8805 ± 0.0010 inch)
- Inside diameter ... 60.305 ± 0.025 mm (2.3742 ± 0.0010 inch)
(9) 207-1738 Bearing
- outside diameter ... 104.993 ± 0.0075 mm (4.1336 ± 0.0003 inch)
- Inside diameter ... 69.9930 ± 0.0075 mm (2.7556 ± 0.0003 inch)
Note: Secure the bearing with 185-3994 Bearing Mount Compound.