Illustration 1 | g01121477 |
Cylinder stroke ... 1972 mm (77.64 inch)
(1) Torque setting for self-locking nut ... 6500 ± 500 N·m (4795 ± 370 lb ft)
Lubricate the threads of the self-locking nut with clean grease.
(2) Diameter of piston ... 149.5 ± 0.03 mm (5.8858 ± 0.0012 inch)
(3) Bore of cylinder ... 150 ± 0.08 mm (5.9055 ± 0.0031 inch)
(4) Diameter of piston rod ... 107.9 ± 0.038 mm (4.248 ± 0.0015 inch)
(5) Bore of head ... 108.28 ± 0.03 mm (4.2630 ± 0.0012 inch)
(6) Torque setting for the head ... 600 ± 130 N·m (440 ± 95 lb ft)
Lubricate the threads of the head (6) with clean grease.
Apply sealant to wiper seal groove (7) prior to assembly.
Note: Lubricate all seals with clean lubricant that is being sealed.
(8) 210-8897 Sleeve Bearing
- outside diameter ... 85.845 ± 0.025 mm (3.3797 ± 0.0010 inch)
- Inside diameter ... 70.315 ± 0.025 mm (2.7683 ± 0.0010 inch)
(9) 210-8374 Bearing
- outside diameter ... 119.9925 ± 0.0075 mm (4.7241 ± 0.0003 inch)
- Inside diameter ... 79.9925 ± 0.0075 mm (3.1493 ± 0.0003 inch)
Note: Secure the bearing with 185-3994 Bearing Mount Compound.