3524B Engines for Off-Highway Trucks Caterpillar


MID 033 - CID 0829 - FMI 04 Rear Aftercool Temperature short to ground

Usage:

3524B 2CS
Conditions Which Generate This Code:

The Electronic Control Module (ECM) reads an oil pressure signal voltage below 0.2 VDC for one second. The ECM has been powered for three seconds. The diagnostic codes 263-03 and 263-04 are not active.

System Response:

The CID-FMI is logged in memory. The CID-FMI may be viewed on a display module or the Caterpillar Electronic Technician (ET). A default value of −40 °C (−40 °F) is used.

Test Step 1. Perform the following diagnostic procedure: "Engine Sensor Open/Short Test"

Results:

  • OK - STOP

  • REPAIRED, OK - STOP

Caterpillar Information System:

2001/06/04 Seals for the Relief Valves on the Transmission {5117}
3524B Engines for Off-Highway Trucks MID 033 - CID 0829 - FMI 03 Rear Aftercool Temperature open/short to +batt
3524B Engines for Off-Highway Trucks MID 033 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal
3524B Engines for Off-Highway Trucks MID 033 - CID 0827 - FMI 08 Left Exhaust Temperature signal abnormal
3524B Engines for Off-Highway Trucks MID 033 - CID 0800 - FMI 09 Unable to communicate with VIMS
3524B Engines for Off-Highway Trucks MID 033 - CID 0799 - FMI 12 Need Service tool update
3524B Engines for Off-Highway Trucks MID 033 - CID 0590 - FMI 09 Unable to communicate with Engine ECM
3524B Engines for Off-Highway Trucks MID 033 - CID 0546 - FMI 06 Ether Hold Relay short to +batt
3524B Engines for Off-Highway Trucks MID 033 - CID 0546 - FMI 05 Ether Hold Relay open/short to ground
735, 740 and 740 EJECTOR Articulated Trucks Braking System Brake Control Valve (Parking Brake)
3524B Engines for Off-Highway Trucks MID 033 - CID 0545 - FMI 06 Ether Start Relay short to ground
3524B Engines for Off-Highway Trucks MID 033 - CID 0545 - FMI 05 Ether Start Relay open/short to +batt
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0646 - FMI 06
769D Off-Highway Truck and 771D Quarry Truck Battery Disconnect Switch
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0650 - FMI 02
2001/05/07 Correction to Systems Operation, Testing and Adjusting , "Tilt Cylinder Head End Relief Valves" {5117}
777D HAA Off-Highway Truck Towing With Power Train Failure
TK1051 Track Feller Buncher Machine System Pump Head (Saw)
Instructions for the Installation of the 174-1508 Electric Motor {5927} Instructions for the Installation of the 174-1508 Electric Motor {5927}
3176C Engine for Caterpillar Built Machines Travel Alarm System - Test
769D Off-Highway Truck/Tractor and 771D Quarry Truck Suspension Cylinder - Check
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems Pump Head (Main)
2001/05/14 Modifications to the Implement Pump Are Used on Forwarders {5070, 5084}
561M Pipelayer Hydraulic Tank and Filter - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.