826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Caterpillar


Sound Information and Vibration Information

Usage:

824G II AWW
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in "ANSI/SAE J1166 October 98" is 80 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environment.

The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in "SAE J88 June 86", mid-gear-moving, is 81 dB(A).

Sound Performance for Machines Offered in European Union Countries and in Countries that Adopt the EU Directives

The operator sound pressure level is 80 dB(A) measured according to the static test procedures and conditions specified in "ISO 6394: 1998".

As manufactured by Caterpillar, this machine's exterior sound power level meets the criteria specified in the European Directives noted on the certificate of conformance and the accompanying labels.

Vibration Level

The hands and arms are exposed to a weighted root mean square acceleration that is less than 2.5 m/sec2.

The whole body is exposed to a weighted root mean square acceleration that is less than 0.5 m/s2.

Measurements are obtained on a representative machine using the procedures in the following standards:

  • "ISO 2631/1"

  • "ISO 5349"

  • "SAE J1166"

Caterpillar Information System:

725 and 730 Articulated Trucks Power Train Modulating Valve (Torque Converter Lockup Clutch) - Test
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 1326 - FMI 02
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 1248 - FMI 06
C-15 and C-16 Industrial Engines Flywheel Housing
C-15 and C-16 Industrial Engines Cooling System
2001/01/22 An Improved Brake Relay Valve is Available for Certain Off-Highway Trucks {4265, 4269, 4280}
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Seat Belt Adjustment
RM-250C Reclaimer Mixer Machine Systems Oscillating and Steering Bar
2001/01/29 A Longer Bolt Is Used on the Parking Brake {4267}
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Fire Extinguisher Location
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 1248 - FMI 05
RM-250C Reclaimer Mixer Machine Systems Metering Pump (Steering)
2001/01/08 Correction to Disassembly and Assembly Manuals {3256, 3258}
CP-663E, CS-663E and CS-683E Vibratory Compactors Engine Crankcase Breather - Clean - If Equipped
2001/01/29 A New Fuel Transfer Pump is Now Available for 3054 Engines {1256}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Piston Motor (Drag Conveyor) - Assemble
3500B Engines General Information
RM-250C Reclaimer Mixer Machine Systems Solenoid Valve (Rotor Lift)
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Plate Locations and Film Locations
C15 Petroleum Generator Set Engines Basic Engine
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Metering Pump (Steering) - Disassemble
2000/12/01 Repair Parts Available for Alternator R-Terminal {1405}
120H Motor Grader Maintenance Interval Schedule
RM-250C Reclaimer Mixer Machine Systems Torque Limiting Coupling - Optional
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.