RM-250C Reclaimer Mixer Caterpillar


Engine Oil Sample - Obtain

Usage:

RM-250C AWG

------ WARNING! ------

热油和热的部件可能会导致人员受伤。 不要让热的油和部件接触皮肤。


取样与分析

除了要有良好的保养计划之外,卡特彼勒建议定期进行 S·O·S 机油分析,以监控发动机的状况,确定发动机所需的保养。

应该在机油暖和和充分混合情况下抽取油样。 在这段时间抽取油样,油样能代表曲轴箱里的油。 关于抽取发动机机油样品的资料,参见专门出版物, SEBU6250, "S·O·S定期油样分析"。 关于抽取发动机机油样品的更多资料,参见专门出版物, PEHP6001, "如何获取好的油样"。

取得 S·O·S油样

换油时,抽取发动机油样。 在规定的保养周期抽取发动机油样。

Caterpillar Information System:

2000/11/27 Correction to Parts Manual {7524}
3176C Engine for Caterpillar Built Machines E600 High Hydraulic Oil Temperature Warning
2000/11/27 Correction to the "Service Sheet" {7524}
RM-250C Reclaimer Mixer Rotor Chain Drive Case Oil Level - Check
Water Spray System Piston Pump (Water Spray)
2000/11/27 A Seal Kit is now Available for Servicing the Axle Oil Cooling Pump {5073}
Water Spray System Gear Motor (Water Spray)
C-15 and C-16 Industrial Engines Engine Design
3054 Engine Belt Tension Chart
Water Spray System Water Spray Pump
HF181, HF201 and HF221 Felling Heads Side Tilt Bearing
HF181, HF201 and HF221 Felling Heads Piston Motor (Disc Saw)
HP750 Processing Head General Hazard Information
3176C and 3196 Engines for Caterpillar Built Machines E015 High Engine Coolant Temperature Derate
TK1051 Track Feller Buncher Air Conditioning and Heating Control
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Window Wiper and Wiper Motor (Rear) - Install
3176C and 3196 Engines for Caterpillar Built Machines E025 High Inlet Air Temperature Derate
2000/11/27 Revision to the "Service Sheet" for the 250 Hour Service {7524}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Service Brake Pedal Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines E096 High Fuel Pressure
C7 and C9 Engines for Caterpillar Built Machines CID 0091 FMI 02 Incorrect Throttle Switch inputs
797 Off-Highway Truck Power Train Pressure Sensor (Differential Oil)
797 Off-Highway Truck Power Train Bypass Switch (Differential Oil Filter)
2001/01/15 Improved Mounting Pins and Bushings Are Now Used On The Equalizer Bar {7206}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.