Bank Valve (Backhoe) - Disassemble
Disassembly Procedure
- Remove three washers, three nuts (1) and cover (2) .
Show/hide table
Illustration 1 | g00734707 |
- Remove four O-rings (3) from cover (2) .
Show/hide table
Illustration 2 | g00735662 |
- Remove three washers (4) and boom valve (5) .
Show/hide table
Illustration 3 | g00735664 |
- Remove four O-rings (6) from boom valve (5) .
Show/hide table
Illustration 4 | g00735666 |
- Remove two relief valves (7) .
Show/hide table
Illustration 5 | g00734717 |
- Remove O-rings (8), (9), and (10) from relief valve (7) .
Show/hide table
Illustration 6 | g00734921 |
- Remove four bolts (11), two housings (12) and the O-ring.
Show/hide table
Illustration 7 | g00734933 |
- Remove nut (14) and spring assembly (13) .
Show/hide table
Illustration 8 | g00734722 |
- Slide spool (15) from boom valve (5) .
Show/hide table
Illustration 9 | g00734753 |
- Remove stud (16), spring (17), nut (18) and two retainers (19) from both ends of spool (15) .
Show/hide table
Illustration 10 | g00734778 |
- Remove seat (20) .
Show/hide table
Illustration 11 | g00734801 |
- Remove ball (21) and O-rings (22), (23), and (24) .
Show/hide table
Illustration 12 | g00734802 |
- Remove plug (25) .
Show/hide table
Illustration 13 | g00734806 |
- Remove spool (26), O-ring (27) and the spring (not shown).
Show/hide table
Illustration 14 | g00734810 |
- Remove valve (28) .
Show/hide table
Illustration 15 | g00734812 |
- Remove O-rings (29), (30), (31), (32), and (33) from valve (28) .
Show/hide table
Illustration 16 | g00734821 |
- Remove three washers (34), and swing valve (35) .
Show/hide table
Illustration 17 | g00735672 |
- Remove two relief valves (36) .
Show/hide table
Illustration 18 | g00734847 |
- Remove O-rings (37), (38), (39), and (40) from relief valve (36) .
Show/hide table
Illustration 19 | g00734850 |
- Remove four bolts (41) and two housings (42) .
Show/hide table
Illustration 20 | g00734853 |
- Remove nut (44) and spring assembly (43) .
Show/hide table
Illustration 21 | g00734856 |
- Slide spool (45) from swing valve (35) .
Show/hide table
Illustration 22 | g00734859 |
- Remove ball (46), spring (47), and spacer (48) from spool (45) .
Show/hide table
Illustration 23 | g00734867 |
- Remove valve (49). Remove two O-rings (50) .
Show/hide table
Illustration 24 | g00734873 |
- Remove spring (51), and O-rings (52), (53), and (54) from valve (49) .
Show/hide table
Illustration 25 | g00734875 |
- Disassemble swing valve (35). Refer to steps 11 through 16 for the proper procedure.
- Remove three washers (55) and bucket valve (56) .
Show/hide table
Illustration 26 | g00735685 |
- Remove two relief valves (57) .
Show/hide table
Illustration 27 | g00734897 |
- Remove O-rings (58), (59), (60), and (61) from relief valve (57) .
Show/hide table
Illustration 28 | g00734901 |
- Disassemble bucket valve (56). Refer to steps 7 through 16 for the proper procedure.
- Remove three washers (62) and stick valve (63) .
Show/hide table
Illustration 29 | g00735691 |
- Remove four O-rings (64) .
Show/hide table
Illustration 30 | g00735693 |
- Remove relief valves (65) and (66) .
Show/hide table
Illustration 31 | g00734918 |
- Disassemble relief valve (65). Refer to step 6 for the proper procedure.
- Disassemble relief valve (66). Refer to step 29 for the proper procedure.
- Disassemble stick valve (63). Refer to steps 7 through 16 for the proper procedure.
- Remove three washers (67) and three studs (68) from cover (69) .
Show/hide table
Illustration 32 | g00735699 |
- Remove seat (70) .
Show/hide table
Illustration 33 | g00734935 |
- Remove ball (71), and O-rings (72), (73), and (74) .
Show/hide table
Illustration 34 | g00734937 |
Caterpillar Information System:
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System MID 030 - CID 0248 - FMI 02
AP-1050B and BG-245C Asphalt Pavers Capacities (Refill)
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Limited Slip Differential - Assemble
Caterpillar Monitoring System Connector Contact Description of Main Display Module
Caterpillar Monitoring System MID 030 - CID 0177 - FMI 08
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Ride Control
725 and 730 Articulated Trucks Sound Information and Vibration Information
725C2 Articulated Truck Engine Starting
Caterpillar Monitoring System MID 030 - CID 0177 - FMI 04
C-10 and C-12 Industrial Engines Fuel Priming Pump and Primary Fuel Filter
3114, 3116 and 3126 Engines Air Compressor Drive Gear - Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Harvester Head - Clean/Inspect
Caterpillar Monitoring System Diagnostic Code List
Caterpillar Monitoring System MID 030 - CID 0263 - FMI 03
Caterpillar Monitoring System Normal Mode
3500B Engines General Information
Caterpillar Monitoring System Harness Code Mode
2000/11/13 Operational Requirements Needed to Use the Dyno Mode Tool in Caterpillar Electronic Technician {0785}
Caterpillar Monitoring System MID 030 - CID 0263 - FMI 04
CB-334D and CB-335D Vibratory Compactors Eccentric Weight Housing Oil - Change
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Rotator
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Gear Pump (Implement, Pilot and Braking) - Disassemble
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0690 - FMI 03
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System MID 030 - CID 0271 - FMI 03