MID 030 - CID 0177 - FMI 08
产生此代码的情况:
Show/hide table
 | |
| 图 1 | g00594692 |
温度传感器示意图（变速箱油） | |
维修说明：确保所需诊断代码为保留状态。 确保诊断代码指示器显示"维修代码（SERV CODE）"。 以上示意图显示了典型的部件安装方案。 使用正在维修的机器的电气系统示意图来确认接头触点和导线数量。
注: 请参阅故障诊断和排除, "传感器信号电压"，对该部件进行故障诊断和排除。
测试步骤 1. 进行以下的诊断步骤: 传感器信号电压
结果:
- 正常 - 停止
- 经修理后，正常。 - 停止
Caterpillar Information System:
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Ride Control
725 and 730 Articulated Trucks Sound Information and Vibration Information
725C2 Articulated Truck Engine Starting
Caterpillar Monitoring System MID 030 - CID 0177 - FMI 04
C-10 and C-12 Industrial Engines Fuel Priming Pump and Primary Fuel Filter
3114, 3116 and 3126 Engines Air Compressor Drive Gear - Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Harvester Head - Clean/Inspect
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Gear Motor (Hydraulic Fan) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Disassemble
Caterpillar Monitoring System MID 030 - CID 0110 - FMI 04
Caterpillar Monitoring System MID 030 - CID 0100 - FMI 08
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Bank Valve - Assemble
Caterpillar Monitoring System Connector Contact Description of Main Display Module
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Limited Slip Differential - Assemble
AP-1050B and BG-245C Asphalt Pavers Capacities (Refill)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System MID 030 - CID 0248 - FMI 02
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Disassemble
Caterpillar Monitoring System Diagnostic Code List
Caterpillar Monitoring System MID 030 - CID 0263 - FMI 03
Caterpillar Monitoring System Normal Mode
3500B Engines General Information
Caterpillar Monitoring System Harness Code Mode
2000/11/13 Operational Requirements Needed to Use the Dyno Mode Tool in Caterpillar Electronic Technician {0785}
Caterpillar Monitoring System MID 030 - CID 0263 - FMI 04