Boom Kickout Mechanism - Remove and Install
Removal Procedure
Show/hide table
Personal injury can result from parts and/or covers under spring pressure. Spring force will be released when covers are removed. Be prepared to hold spring loaded covers as the bolts are loosened. |
- Remove four bolts (2) evenly in order to relieve the spring tension.
Show/hide table
Illustration 1 | g00634966 |
- Remove plate (1) .
- Remove rod assembly (3), two springs (4), and guide (5) .
Show/hide table
Illustration 2 | g00634970 |
Show/hide table
Illustration 3 | g00634975 |
Installation Procedure
- Assemble two springs (4) and guide (5) to rod assembly (3) .
Show/hide table
Illustration 4 | g00634991 |
- Install rod assembly (3) into the housing. Make sure that the end of the rod assembly is started into the hole at the back of the housing.
Show/hide table
Illustration 5 | g00634970 |
- Install plate (1) onto rod assembly (3) .
Show/hide table
Illustration 6 | g00634998 |
- Install four bolts (2) into plate (1) and the housing.
Show/hide table
Illustration 7 | g00634966 |
Caterpillar Information System:
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 0526 - FMI 06 Turbo Wastegate Drive current high
561M Pipelayer Control Valve (Boom Stop) - Install
C-9 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Neutral Start Function
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 0526 - FMI 05 Turbo Wastegate Drive current low
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Replace
CS-531D, CP-533D and CS-533D Vibratory Compactors Tire Inflation - Check
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Assemble
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Directional Shift Management Function
C9 Engine For Caterpillar Built Machines Lifter Group - Remove and Install
3524B Engines for Off-Highway Trucks MID 036 - CID 0296 - FMI 09 Unable to communicate with Transmission ECM
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks MID 036 - CID 0291 - FMI 06 Engine Cooling Fan Solenoid short to ground
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Elevated Downshift Function
CS-531D, CP-533D and CS-533D Vibratory Compactors Tilt Hood Actuator - Lubricate
12H, 140H and 160H Motor Graders Machine Systems Blade Lift - Install
D350E Series II and D400E Series II Articulated Trucks Cooling System Pressure Cap - Clean/Replace
12H, 140H and 160H Motor Graders Machine Systems Centershift Cylinder - Remove
527 Track-Type Skidder Machine Supplements Bulldozer Tilt Cylinder - Remove
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Bearing Preload for Service Brake - Adjust
12H, 140H and 160H Motor Graders Machine Systems Centershift Cylinder - Install
12H, 140H and 160H Motor Graders Machine Systems Centershift Lock - Disassemble
12H, 140H and 160H Motor Graders Machine Systems Centershift Lock - Remove
12H, 140H and 160H Motor Graders Machine Systems Centershift Lock - Install
CS-531D, CP-533D and CS-533D Vibratory Compactors Steering Cylinder Ends - Lubricate