D250E Series II and D300E Series II Articulated Trucks Machine Systems Caterpillar


Parking Brake - Assemble

Usage:

D250E II 4PS

Assembly procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
A  5P-5197  Pliers 


    Illustration 1g00515286

  1. Install internal seal ring (8) and external seal ring (9) to clutch piston (7). Install the seals in the direction, as shown above.


    Illustration 2g00515283

  2. Install spring discs (6) to cover (1). Use Tooling (A) in order to install retaining ring (5) that secures spring discs (6) to cover (1).


    Illustration 3g00515282

  3. Install the O-ring seals to hydraulic adapter (2), hydraulic adapter (3) and access plug (4).


    Illustration 4g00515279

  4. Install hydraulic adapter (3) to cover (1). Install access plug (4) to cover (1). Install hydraulic adapter (2) to hydraulic adapter (3).

End By:

  1. Install the parking brake. Refer to Disassembly and Assembly, "Parking Brake - Install". The information is in this manual.

Caterpillar Information System:

3176C and 3196 Engines For Caterpillar Built Machines Rocker Shaft and Pushrod - Install
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Air Ratio Valve (Front Brake)
D8R Series II Track-Type Tractor Hydraulic System Check Valve
583R Pipelayer Power Train Track Roller Frames
IT14G Integrated Toolcarrier and 914G Wheel Loader Steering System Secondary Steering Pump and Electric Motor
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Hydraulic System Hydraulic Tank (Hoist and Brake)
793C and 793C XQ Off-Highway Truck Hydraulic System Control Valve (Hoist)
325B Excavator Machine Systems Swing Motor - Disassemble
3406C Engines for Caterpillar Built Machines Fuel Pressure Indicator
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Solenoid Valve (Overspeed)
583R Pipelayer Power Train Recoil Group
793C Off-Highway Truck/Tractor Power Train Differential and Bevel Gear - Assemble
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Refrigerant Accumulator - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Lifter Group - Remove and Install
3406E On-Highway Engine Crankshaft Rear Seal - Remove
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Control Valve (Hoist)
773D Off-Highway Truck and 775D Quarry Truck Air System and Brakes Control Valve (Hoist)
3304B and 3306B Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0642 FMI 03 Solenoid Valve 2 (Direction Clutch) Voltage Above Normal - Test
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0643 FMI 03 Solenoid Valve 3 (Direction Clutch) Voltage Above Normal - Test
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Air/Hydraulic Cylinder (Front Caliper)
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Refrigerant Compressor - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations CID 0644 FMI 03 Solenoid Valve 4 (Speed Clutch) Voltage Above Normal - Test
AP-1055B and BG-2455C Asphalt Pavers Time Delay Relay Control (Leveling)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.