Counterbalance Valve (Tailgate) - Install
- Inspect all parts and clean all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Show/hide table
Illustration 1 g00512680 - Install the O-ring seal to plug (15). Install plug (15) and O-ring seal (16) to counterbalance valve (3). Install bonded seal (18) to banjo bolt (14). Bonded seal (17) will be installed with counterbalance valve (3).
Show/hide table
Illustration 2 g00512679 - Install the other bonded seal on banjo bolt (14) and between counterbalance valve (3) and hydraulic cylinder (13). Position counterbalance valve (3) to hydraulic cylinder (13).
- Install banjo bolt (14) that secures counterbalance valve (3) to hydraulic cylinder (13). Tighten the banjo bolt to a torque of
135 ± 15 N·m (100 ± 11 lb ft) .Show/hide tableIllustration 3 g00512678 - Tighten retaining nut (11) in order to connect hose (12) to counterbalance valve (3).
Show/hide table
Illustration 4 g00512677 - Tighten retaining nut (9) in order to connect hose (10) to adapter (8).
Show/hide table
Illustration 5 g00512676 - Tighten retaining nut (7) in order to connect hose (6) to counterbalance valve (3). Tighten retaining nut (5) in order to connect hose (6) to adapter (4).
Show/hide table
Illustration 6 g00512681 - Remove nylon lifting straps (1) from tailgate (2).
Caterpillar Information System:
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Aftercooler - Remove
D350E Series II Articulated Truck Counterbalance Valve (Tailgate) - Remove
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Oil Filter Bypass Valve - Remove and Install
773D Off-Highway Truck and 775D Quarry Truck Tire Valve
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Tire Valve
773D Off-Highway Truck and 775D Quarry Truck Torque Converter and Transmission Pressure Chart
773D Off-Highway Truck and 775D Quarry Truck Torque Converter and Transmission Pressure Chart
527 Track-Type Skidder Engine Crankcase Breather - Clean
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydraulic Oil Filter
527 Track-Type Skidder Engine Air Filter Secondary Element - Replace
3176C and 3196 Engines For Caterpillar Built Machines Exhaust Manifold - Remove and Install
583R Pipelayer Power Train Steering and Brake Control Valve
3406E On-Highway Engine Electronic Unit Injector - Remove
527 Track-Type Skidder Engine Oil and Filter - Change
527 Track-Type Skidder Hydraulic System Hydraulic Pump
769D Off-Highway Truck/Tractor and 771D Quarry Truck Power Train Magnetic Sensor (Wheel Speed)
D350E Series II Articulated Truck Tailgate Cylinder - Remove
3406E On-Highway Engine Compression Brake - Assemble - If Equipped
793C Off-Highway Truck/Tractor Power Train Lateral Control Rod (Rear Axle Housing) - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Cab Mounting
527 Track-Type Skidder Engine Oil Level - Check
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Three-Point Hitch Side Sway
773D Off-Highway Truck and 775D Quarry Truck Magnetic Sensor (Wheel Speed)
D250E Series II and D300E Series II Articulated Trucks Machine Systems Tailgate - Remove