Fire Extinguisher Location
Make sure that a fire extinguisher is on the machine. Make sure that you are familiar with the operation of the fire extinguisher. Inspect the fire extinguisher and service the fire extinguisher. Obey the recommendations on the instruction plate.
Show/hide table
 | |
| Illustration 1 | g00510683 |
Mount the fire extinguisher on the rear portion of the engine hood. This is the recommended location. Do not weld the ROPS in order to install the fire extinguisher. Also, do not drill holes in the ROPS in order to mount the fire extinguisher on the ROPS.
To mount the fire extinguisher to the ROPS, strap the mounting plate to a leg of the ROPS. If the weight of the fire extinguisher is more than 4.5 kg (10 lb), mount the fire extinguisher as low as possible on one leg. Do not mount the fire extinguisher on the upper one-third area of the leg.
Caterpillar Information System:
527 Track-Type Skidder Starting Below 0°C (32°F) with Ether Starting Aid - If Equipped
527 Track-Type Skidder Starting Above 0°C (32°F)
3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Electronic Control Module (Engine) - Remove and Install
527 Track-Type Skidder Walk-Around Inspection
527 Track-Type Skidder Power Train Equalizer Bar
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Parking Brake System Pressure - Test and Adjust
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Brake Oil Overheating Troubleshooting
554 Forwarder and 574 Forwarder Cab Tilting
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Planetary - Assemble
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Hoist, Torque Converter, and Brake System Troubleshooting
527 Track-Type Skidder Grapple Rotation Control
527 Track-Type Skidder Power Train Final Drive
3406C Engines for Caterpillar Built Machines Engine Oil Pan
D250E Series II and D300E Series II Articulated Trucks Power Train Differential and Bevel Gear (Front and Rear) - Disassemble
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Slack Adjuster - Test and Adjust
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
554 Forwarder and 574 Forwarder Battery Disconnect Switch
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Tank (Front)
527 Track-Type Skidder Power Train Pivot Shaft
527 Track-Type Skidder Power Train Front Frame
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering and Brake Manifold Valve - Install
3306C Engines for Caterpillar Built Machines Valve Rocker Arms and Lifters
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement Hydraulic Application Guidelines
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Tank (Rear)