Fuel Tank - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: Put identification on all lines, hoses, wires, and tubes for installation purposes. Install a cap or plug on all lines, hoses, and tubes in order to prevent foreign material from entering the system.
Note: Drain all fluids into a suitable container for storage or disposal.
- Open side panel (1) on the right hand side of the machine.
Show/hide table
 | |
| Illustration 1 | g00610953 |
- Disconnect hose assembly (2) from the top of the fuel tank.
Show/hide table
 | |
| Illustration 2 | g00610958 |
- Disconnect wires (3) .
Show/hide table
 | |
| Illustration 3 | g00610960 |
- Disconnect fuel hose assembly (4) from water separator (5) .
Show/hide table
 | |
| Illustration 4 | g00610962 |
- Remove panel assembly (6) .
Show/hide table
 | |
| Illustration 5 | g00610969 |
- Remove fuel tank support (7) .
Show/hide table
 | |
| Illustration 6 | g00610973 |
- Use two people to remove fuel tank (8). The weight of the fuel tank is 45 kg (100 lb).
Show/hide table
 | |
| Illustration 7 | g00610975 |
Installation Procedure
- Use two people to install fuel tank (8). The weight of the fuel tank is 45 kg (100 lb).
Show/hide table
| | |
| Illustration 8 | g00610975 |
- Install fuel tank support (7) .
Show/hide table
| | |
| Illustration 9 | g00610973 |
- Install panel assembly (6) .
Show/hide table
| | |
| Illustration 10 | g00610969 |
- Connect fuel hose assembly (4) to water separator (5) .
Show/hide table
| | |
| Illustration 11 | g00610962 |
- Connect wires (3) .
Show/hide table
| | |
| Illustration 12 | g00610960 |
- Connect hose assembly (2) to the top of the fuel tank.
Show/hide table
| | |
| Illustration 13 | g00610958 |
- Close side panel (1) on the right hand side of the machine.
Show/hide table
| | |
| Illustration 14 | g00610953 |
Caterpillar Information System:
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Fuel Filter and Base - Remove and Install
AP-1055B and BG-2455C Asphalt Pavers Auxiliary System Hydraulic Cylinder (Track Tension)
3306C Engines for Caterpillar Built Machines Vibration Damper
966G Wheel Loader and 972G Wheel Loader Engine Supplement Piston Motor (Hydraulic Fan) - Assemble
980G Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Fuel Cooler - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Fan Drive - Remove
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Fan Drive - Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Fan Drive - Disassemble
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Fan Drive - Assemble
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Fan - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Engine Oil Pressure Sensor - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Fuel Transfer Pump - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Hydraulic Oil Cooler - Remove and Install
AP-1055B and BG-2455C Asphalt Pavers Auxiliary System Hydraulic Cylinder (Truck Hitch)
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Muffler - Remove and Install
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System General Information
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Precleaner - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Gear Pump (Implement, Steering and Brakes) - Assemble
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Radiator - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Radiator Tank - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Refrigerant Compressor - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Refrigerant Condenser - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Rotary Screen Drive - Install