Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Caterpillar


Covers - Remove and Install

Usage:

45 1DR

Removal Procedure

Note: The right side undercarriage has been removed for photographic reasons.



    Illustration 1g00691128

  1. Remove seven bolts (2) and three nuts (1). Remove the sheet metal (3).


    Illustration 2g00691129

  2. Remove three bolts (4) and remove front sheet metal (5).

Installation Procedure



    Illustration 3g00691129

  1. Install front sheet metal (5) and install three bolts (4).


    Illustration 4g00691128

  2. Install sheet metal (3) and install three nuts (1) and seven bolts (2).

Caterpillar Information System:

69D and 769D Off-Highway Trucks and 771D Quarry Truck Water Temperature Regulator - Install
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Fan Drive - Disassemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Duo-Cone Conventional Seals - Install
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0444 FMI 03 Magnetic Switch (Start Relay) Voltage Above Normal - Test
980G Wheel Loader Braking System Parking Brake - Test
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Control Valve (Lift and Auxiliary)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Control Valve (Hoist) - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Water Temperature Regulator - Remove
Electronic Modular Control Panel II (EMCP II) For MUI Engines Charging System - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines Speed Sensor (Engine) - Adjust
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Sensors
784C and 785C Off-Highway Truck/Tractors Transmission Tank Suction Screen - Clean/Inspect/Replace
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Belt - Detension and Tension
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Belt - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Belt Tension Switch - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Accumulator - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Reaction Arm - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Reaction Arm - Install
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0444 FMI 05 Magnetic Switch (Start Relay) Current Below Normal - Test
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Midroller - Remove
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Midroller - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Midroller Shaft - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Drive Wheel - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Front Idler Adjusting Lever and Cap - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.