Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Caterpillar


Transmission Oil Reservoir

Usage:

45 1DR



Illustration 1g00478415

The oil reservoir for the transmission is a common sump that is shared with the implement hydraulic system and the steering hydraulic system. The transmission housing is a part of the common sump. The hydraulic oil is drained by removing drain plug (1) located in the bottom of the rear axle housing.




Illustration 2g00478419

The hydraulic oil filler cap (2) is located at the rear of the machine. Dipstick (3) for the hydraulic oil level is located near the left rear axle housing. The distance that is from the "ADD" mark to the "FULL" mark on the dipstick is approximately 11 L (3 US gal). If you are operating the machine on a steep slope, the hydraulic oil level must be maintained at the "FULL" mark.

Caterpillar Information System:

550, 570 and 580 Wheel Harvesters Stick - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Oil Cooler (Power Train) - Remove
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Air Cleaner (High Altitude) - Install
980G Wheel Loader Braking System Service Brake Discs - Check
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Oil Filter and Oil Filter Base - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Parking Brake Actuator - Remove and Install
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Gear Pump (Fan Drive) - Remove and Install
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Supplement Fan and Gear Motor (Fan Drive) - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Brake Master Cylinder
515 Wheel Skidder and 525 Wheel Skidder Shipping the Machine
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Fuel Priming Pump - Remove and Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch and Quick Hitch
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Implement Control Valve - Parallel Logic Hydraulic System
572R Pipelayer Hydraulic System Boom and Hook Control Valve
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch
69D and 769D Off-Highway Trucks and 771D Quarry Truck Aftercooler - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Radiator - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Oil Cooler (Power Train) - Install
AP-1000B and BG-260C Asphalt Pavers Propel Electronic Control Module
AP-1000B and BG-260C Asphalt Pavers Tow Point Cylinders
AP-1055B and BG-2455C Asphalt Pavers Screed Adjustment
69D and 769D Off-Highway Trucks and 771D Quarry Truck Cowling (Radiator) - Remove and Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Oil Cooler Bypass Valve - Remove and Install
IT28G Integrated Toolcarrier Circuit Breakers and Fuses - Reset/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.