PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN 2007 ON HIGHWAY C13 AND C15 TRUCK ENGINES
Usage:
REBE1954-00
Show/hide table
| 04May2007 |
U-167
A-137
O-153
TT-11
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN 2007 ON HIGHWAY C13 AND C15 TRUCK ENGINES |
|
| 1000 | PS42399 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42399" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31May2008 |
PROBLEM
Show/hide table
| Some early C13 and C15 On Highway Truck Engines must be replaced due to obsolete engine hardware. At the end of this program these engines will not be serviceable, therefore must be replaced. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C13 | LEE00612-00613, 615, 619, 638-640, 642, 645, 648-650, 653, 655-656, 658-675, 700-716 |
| C15 | SDP00500, 502, 504, 510, 512-518, 521-525, 527-530, 532, 534-535, 541-542, 544-550, 600-639, 700, 704 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| The replacement engine must be ordered using the "New Engine Replacement Order" process. The Caterpillar Dealer should contact their Caterpillar representative to make necessary arrangements to have the engine ordered. A power supply must be provided for the Caterpillar Regeneration System Purge Air Pump. Some Truck OEM?s may provide a harness for this option. Check with the Truck manufacturer for availability. If no harness is provided by the Truck Manufacturer please follow the attached guidelines for pump supply power. |
Show/hide table
|
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 24.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HEUI PUMP, INJECTOR O-RINGS, AND FUEL PRESSURE REGULATOR ON CERTAIN C9 ON-HIGHWAY MASS TRANSIT BUS ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE HEUI PUMP, INJECTOR O-RINGS, AND FUEL PRESSURE REGULATOR ON CERTAIN C9 ON-HIGHWAY MASS TRANSIT BUS ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING UPDATED SOFTWARE ON CERTAIN AGCO MT865 TRACTORS. PRODUCT SUPPORT PROGRAM FOR INSTALLING UPDATED SOFTWARE ON CERTAIN AGCO MT865 TRACTORS.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGERS AND AIR LINES GROUP AT FIRST TOP END OVERHAUL ON CERTAIN 3516BHD LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGERS AND AIR LINES GROUP AT FIRST TOP END OVERHAUL ON CERTAIN 3516BHD LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING LOAD SHARING MODULE ON CERTAIN 3412 GENSETS. PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING LOAD SHARING MODULE ON CERTAIN 3412 GENSETS.
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING S1 FRAME ABB CIRCUIT BREAKER WITH S3 FRAME ABB CIRUIT BREAKER ON CERTAIN C3.3 AND C4.4 GENSET (600V) PRODUCT IMPROVEMENT PROGRAM FOR REPLACING S1 FRAME ABB CIRCUIT BREAKER WITH S3 FRAME ABB CIRUIT BREAKER ON CERTAIN C3.3 AND C4.4 GENSET (600V)
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN MODEL YEAR 2007 C15 AND C13 ENGINES. PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN MODEL YEAR 2007 C15 AND C13 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET, AIR INLET HEATER SOLENOID, OIL FILL TUBE, AND WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY MASS TRANSIT BUS ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR BRACKET, AIR INLET HEATER SOLENOID, OIL FILL TUBE, AND WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY MASS TRANSIT BUS ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE ELECTRIC THROTTLE SENSOR INPUT TO THE ECM ON CERTAIN 3508B, 3508C, AND 3512C PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE ELECTRIC THROTTLE SENSOR INPUT TO THE ECM ON CERTAIN 3508B, 3508C, AND 3512C PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE INFORMATION LABEL ON CERTAIN 3512C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE INFORMATION LABEL ON CERTAIN 3512C GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A DUAL DAMPER ON CERTAIN C27 AND C32 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING A DUAL DAMPER ON CERTAIN C27 AND C32 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 282-8302 FLASHFILE WITH THE 293-7378 FLASHFILE ON CERTAIN C15 GENSET ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 282-8302 FLASHFILE WITH THE 293-7378 FLASHFILE ON CERTAIN C15 GENSET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE CONTROL MODULE SOFTWARE ON CERTAIN C18 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE CONTROL MODULE SOFTWARE ON CERTAIN C18 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING INJECTOR ROCKER ARMS USED IN CERTAIN C18 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING INJECTOR ROCKER ARMS USED IN CERTAIN C18 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CAM IDLER GEARS ON CERTAIN 3126E ON-HIGHWAY TRUCK ENGINES. PRODUCT SUPPORT PROGRAM FOR REPLACING CAM IDLER GEARS ON CERTAIN 3126E ON-HIGHWAY TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 288-5930 FLASHFILE WITH THE 313-8958 FLASHFILE ON CERTAIN C15 GENSET ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 288-5930 FLASHFILE WITH THE 313-8958 FLASHFILE ON CERTAIN C15 GENSET ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GROUND (EARTH) TERMINAL BRACKET ON CERTAIN 3406C, 3456, C15, AND C18 GENERATOR SETS EQUIPPED WITH LC6 GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GROUND (EARTH) TERMINAL BRACKET ON CERTAIN 3406C, 3456, C15, AND C18 GENERATOR SETS EQUIPPED WITH LC6 GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR JACKET WATER HEATER CONTACTOR WIRING AND LOGIC ON CERTAIN C27 GENSETS PRODUCT IMPROVEMENT PROGRAM FOR JACKET WATER HEATER CONTACTOR WIRING AND LOGIC ON CERTAIN C27 GENSETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING LEAKING VALVE STEMS ON CERTAIN TH48 FRAC TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING LEAKING VALVE STEMS ON CERTAIN TH48 FRAC TRANSMISSIONS