793C Off-Highway Truck Machine Systems Caterpillar

Removal Procedure

Show/hide table



Illustration 1	g00455745

1. Remove top (1) of transmission selector lever.

Show/hide table



Illustration 2	g00456152

2. Remove eight screws (2) .

3. Remove rear panel assembly (3) .

Show/hide table



Illustration 3	g00456985

4. Reposition the front panel assembly in order to access the transmission electronic control module. The transmission electronic control module is located under the rear panel.

5. Disconnect one electrical connection (4) .

6. Disconnect one electrical connection (7) .

7. Remove four bolts (5) and four washers (6) .

8. Remove transmission electronic control module (8) .

Installation Procedure

Show/hide table



Illustration 4	g00456985

1. Install transmission electronic control module (8) .

2. Install four washers (6) and four bolts (5) .

3. Connect one electrical connection (7) .

4. Connect one electrical connection (4) .

5. Correctly position the front panel assembly.

Show/hide table



Illustration 5	g00456152

6. Install rear panel assembly (3) .

7. Install eight screws (2) .

   Note: When screws (2) are installed, tighten the screws to a torque of 9 ± 3 N·m (6.6 ± 2.2 lb ft).

Show/hide table



Illustration 6	g00455745

8. Install top (1) of transmission selector lever.