Type of pump: Load Sensing Variable Displacement Piston Pump
For the test, use SAE 10W oil that is at 65°C (150°F).
Test at full speed:
- Output ... 158 L/min (42 US gpm)
- Pressure ... 690 kPa (100 psi)
- Pump speed ... 2200 rpm
- Engine speed ... 2200 rpm
- Pressure ... 690 kPa (100 psi)
- Output ... 150 L/min (40 US gpm)
- Pressure ... 6900 kPa (1000 psi)
- Pump speed ... 2200 rpm
- Engine speed ... 2200 rpm
- Pressure ... 6900 kPa (1000 psi)
Test at half speed:
- Output ... 79 L/min (21 US gpm)
- Pressure ... 690 kPa (100 psi)
- Pump speed ... 1100 rpm
- Engine speed ... 1100 rpm
- Pressure ... 690 kPa (100 psi)
- Output ... 75 L/min (20 US gpm)
- Pressure ... 6900 kPa (1000 psi)
- Pump speed ... 1100 rpm
- Engine speed ... 1100 rpm
- Pressure ... 6900 kPa (1000 psi)
Illustration 1 | g00275709 |
(1) Torque for plug ... 101.5 ± 4.5 N·m (75 ± 3 lb ft)
(2) Torque for the three bolts ... 8.5 ± 1 N·m (75 ± 9 lb in)
(3) Torque for the two screws ... 4 ± 0.4 N·m (36 ± 4 lb in)
(4) 9T-1699 Spring (Large Piston)
- Length under test force ... 11.1 mm (.44 inch)
- Test force ... 32.6 ± 3.11 N (7 ± 1 lb)
- Free length after test ... 17.17 mm (.676 inch)
- Outside diameter ... 24.892 mm (.980 inch)
- Test force ... 32.6 ± 3.11 N (7 ± 1 lb)
Illustration 2 | g00295470 |
(5) Torque for the plug ... 57 ± 3 N·m (42 ± 2 lb ft)
Illustration 3 | g00295471 |
(6) Torque for the bolts ... 70 ± 7 N·m (50 ± 5 lb ft)
(7) Torque for the bolts ... 70 ± 7 N·m (50 ± 5 lb ft)
(8) Torque for the bolts ... 34 ± 3 N·m (25 ± 2 lb ft)
Illustration 4 | g00295479 |
(9) Apply 9S-3263 Thread Lock sealant to the threads. Torque the rod. ... 79 ± 4 N·m (58 ± 3 lb ft)
(10) 6E-6600 Spring (Small Piston)
- Length under test force ... 85.4 mm (3.36 inch)
- Test force ... 178 ± 18 N·m (130 ± 13 lb ft)
- Free length after test ... 91.7 mm (3.61 inch)
- Outside diameter ... 40 mm (1.57 inch)
- Test force ... 178 ± 18 N·m (130 ± 13 lb ft)
(11) Install the shims. Use shims to attain axial shaft end play of 0.01 to 0.10 mm (.0004 to .0039 inch).
Note: The 9T-2197 Shaft Shim Kit consists of 17 shims of various thicknesses. For all of the shims, the outside diameter is 38.5 ± 0.25 mm (1.515 ± .0098 inch). The inside diameter is 28.875 ± 0.125 mm (1.1368 ± .0049 inch).
(12) Apply 9S-3263 Thread Lock sealant to the threads. Torque the rod. ... 79 ± 4 N·m (60 ± 3 lb ft)
(13) The torque for the two bolts ... 12.85 ± 0.15 N·m (115 ± 1 lb in)