Metering Pump (Steering) - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Prevent the contamination of the power train when the hose assemblies and the components are removed from the machine. The contamination of the power train with foreign material will reduce the service life of the components. |
Note: Inspect the O-ring seals. Replace any O-ring seals that are worn or damaged.
Note: When you are installing O-ring seals, lubricate the O-ring seals with the fluid that is being sealed.
- Install four bolts (14) and steering hand metering unit (11) on mounting bracket (12) .
Show/hide table
Illustration 1 | g00387352 |
- Install steering hand metering unit (11), four washers, and four bolts (13) with mounting bracket (12) as an assembly.
- Install four spacers (2), eight washers, and four bolts (1) .
Show/hide table
Illustration 2 | g00387332 |
- Install O-ring seal (6), connector (5), and O-ring seal (4). Connect tube assembly (3) .
- Repeat Step 4 for tube assemblies (7), (8), (9), and (10) .
End By: Install the front plate for the cab compartment. Refer to Disassembly and Assembly, "Plate (Cab Front) - Remove and Install" for the correct procedure.
Caterpillar Information System:
CP-563C and CS-563C Vibratory Compactors Vibratory Support Oil - Change
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Solenoid Valves
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Hydraulic System
D6M Track-Type Tractor Characteristics of Diesel Fuel
D6M Track-Type Tractor Diesel Fuel Recommendations
Cat Commercial Diesel Engine Fluids Recommendations Fuel Information for Diesel Engines
C-10 and C-12 Truck Engines Fuel Filter and Water Separator
Cat Commercial Diesel Engine Fluids Recommendations General Fuel Information
CP-563C and CS-563C Vibratory Compactors Drum Cooling Oil - Change
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Cooling System Coolant (DEAC) - Change
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Components
572R Pipelayer Sampling Interval and Location of Sampling Valve
CP-563C and CS-563C Vibratory Compactors Vibratory Support Oil Level - Check
CP-563C and CS-563C Vibratory Compactors Vibratory Support Oil Sample - Obtain
3176C and 3196 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
631E Series II Wheel Tractor-Scrapers Crankshaft Vibration Damper - Inspect
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Recovery
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Install
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Cooling System Extended Life Coolant - Change
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Cooling System Extended Life Coolant Extender - Add
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Charge
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Evacuate
3176C and 3196 Industrial Engines Cylinder Head Valves
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Head