CP-563C and CS-563C Vibratory Compactors Caterpillar


Vibratory Support Oil - Change

Usage:

CS-563C 4KN


Illustration 1g00388211

The vibratory drive gearbox is located on the right side of the drum.

  1. Remove the drain plug. Drain the oil into a suitable container.

    Note: Dispose of the used oil in a proper manner.

  2. Clean the drain plug and install the drain plug.

  3. Remove the oil level check plug.


    Illustration 2g00388234

  4. Remove the oil filler plug.

  5. Add the oil through the filler plug opening. Refer to the Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities".

  6. Clean the oil level check plug and install the oil level check plug. Clean the filler plug and install the filler plug.

Caterpillar Information System:

D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Solenoid Valves
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Hydraulic System
D6M Track-Type Tractor Characteristics of Diesel Fuel
D6M Track-Type Tractor Diesel Fuel Recommendations
Cat Commercial Diesel Engine Fluids Recommendations Fuel Information for Diesel Engines
C-10 and C-12 Truck Engines Fuel Filter and Water Separator
Cat Commercial Diesel Engine Fluids Recommendations General Fuel Information
CP-563C and CS-563C Vibratory Compactors Drum Cooling Oil - Change
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Cooling System Coolant (DEAC) - Change
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission Components
572R Pipelayer Sampling Interval and Location of Sampling Valve
793C Off-Highway Truck Machine Systems Metering Pump (Steering) - Remove
793C Off-Highway Truck Machine Systems Metering Pump (Steering) - Install
CP-563C and CS-563C Vibratory Compactors Vibratory Support Oil Level - Check
CP-563C and CS-563C Vibratory Compactors Vibratory Support Oil Sample - Obtain
3176C and 3196 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
631E Series II Wheel Tractor-Scrapers Crankshaft Vibration Damper - Inspect
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Recovery
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Install
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Cooling System Extended Life Coolant - Change
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Cooling System Extended Life Coolant Extender - Add
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Charge
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Evacuate
3176C and 3196 Industrial Engines Cylinder Head Valves
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.