IT14G Integrated Toolcarrier Caterpillar


Air Conditioner - Test

Usage:

IT14G 1WN

------ WARNING! ------

Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas can cause bodily harm or death. Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

----------------------

  1. Start the engine and run the engine at high idle.



    Illustration 1g00387723

  1. Press the top of the air conditioner switch (1) .

  1. Set the air conditioner switch knob (2) to the setting for maximum cooling. Set the fan speed switch knob (3) to HIGH.

  1. Allow the air conditioning system to stabilize for two minutes.



    Illustration 2g00387726



    Illustration 3g00448380

  1. Open the engine access door on the back side of the machine. Use the prop rod to hold the engine access door open.



    Illustration 4g00387725

  1. To check the system for refrigerant, feel the suction line (1) and the discharge line (2) .

    If the system contains refrigerant, the discharge line will be warmer than the suction line.

    If the system does not contain refrigerant or the system is very low on refrigerant, poor cooling will result.

Caterpillar Information System:

527 Track-Type Skidder Fixed Boom Winch Control
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Accumulator - Remove and Install
834B and 836 Landfill Compactor Lubricant Viscosities
3034 Engine for Caterpillar Built Machines Engine Oil Pressure Switch
572R Pipelayer Power Train Governor and Decelerator Linkage
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Steering Control
784B and 785B Off-Highway Truck/Tractors Power Train Transmission Hydraulic Control - Test
572R Pipelayer Power Train Transmission
CP-563C and CS-563C Vibratory Compactors Axle Oil Level (Rear) - Check
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Saw Bar Tensioner Oil - Change
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119} Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
CP-563C and CS-563C Vibratory Compactors Neutral Start Switch - Test
793C Off-Highway Truck Machine Systems Piston Pump (Steering) - Disassemble
914G Wheel Loader Axle Oscillation Bearings - Lubricate
IT14G Integrated Toolcarrier Battery - Inspect
3408B and 3408C Industrial and Marine Engines Automatic Timing Advance Unit
IT14G Integrated Toolcarrier Battery Electrolyte Level - Check
IT14G Integrated Toolcarrier Brake Discs - Check
IT14G Integrated Toolcarrier Braking System - Test
572R Pipelayer Ether Starting Aid - If Equipped
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission
572R Pipelayer Caterpillar Monitoring System
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Alternator and Regulator
IT14G Integrated Toolcarrier Battery, Battery Cable or Battery Disconnect Switch - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.