CP-563C and CS-563C Vibratory Compactors Caterpillar


Backup Alarm

Usage:

CS-563C 4KN


Illustration 1g00343776

Backup Alarm - The backup alarm will sound when the propel lever is in the REVERSE position. The backup alarm alerts any personnel that the machine is backing up.

The backup alarm is located on the rear of the machine.



Illustration 2g00100238

A three-position adjustment knob on the back of the backup alarm regulates the volume level of the backup alarm. The alarm settings are HIGH, LOW, and MEDIUM.

The three-position adjustment knob is set to the HIGH setting when the machine is shipped from the factory. The three-position adjustment knob should remain at the HIGH setting unless the job site requires a lower volume level.

Caterpillar Information System:

784B Tractor and 785B Off-Highway Truck Power Train Transmission Neutralizer
CP-563C and CS-563C Vibratory Compactors Horn
789B Off-Highway Truck Starting with Jump Start Cables
789B Off-Highway Truck Air System and Brakes Parking Brake System Pressure - Test and Adjust
CP-563C and CS-563C Vibratory Compactors Window Wiper and Washer Control
Schedules For The On-Fuel Injection Test Stand{0782, 1264} Schedules For The On-Fuel Injection Test Stand{0782, 1264}
793B Off-Highway Truck Engine Starting with Jump Start Cables
631E Series II Wheel Tractor-Scrapers Battery or Battery Cable - Inspect/Replace
CP-563C and CS-563C Vibratory Compactors Light Switches
793B Off-Highway Truck Power Train Electronic Control (Transmission Gear Indicator)
793B Off-Highway Truck Power Train Transmission Control
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake
CP-563C and CS-563C Vibratory Compactors Heating Control
793B Off-Highway Truck Power Train Solenoid Valve (Lockup Clutch)
789B Off-Highway Truck Air System and Brakes Towing the Machine - Preparation
539 Knuckleboom Loader General Hazard Information
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Supplement Water Temperature Regulator - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement Water Pump - Remove and Install
539 Knuckleboom Loader Crushing Prevention and Cutting Prevention
784B and 785B Off-Highway Truck/Tractors Model View Illustrations
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement Governor and Fuel Transfer Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter Base
539 Knuckleboom Loader Before Starting Engine
631E Series II Wheel Tractor-Scrapers Battery Electrolyte Level - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.