950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Caterpillar


Transmission Oil Pump - Remove

Usage:

950G 2JS

Removal Procedure

Start By:

  1. Remove the steering pump. Refer to Disassembly and Assembly, SENR1392, "Steering Pump - Remove".



    Illustration 1g00296710

  1. Remove two bolts (2). Move tube (3) toward the transmission.

  1. Disconnect hydraulic hose (1) .

  1. Disconnect electrical connector (4). Remove electrical connector (5) from the bracket.



    Illustration 2g00296712

  1. Remove six bolts (7) and transmission oil pump (6) .

Caterpillar Information System:

572R Pipelayer Battery, Battery Cable or Battery Disconnect Switch - Replace
3500B Engines for Caterpillar Built Power Modules Fuel Pressure Sensor
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Conveyor Electronic Control Module
789C Off-Highway Truck/Tractor Rear Axle Housing
583R Pipelayer Differential and Final Drive Oil Sample - Obtain
793B Off-Highway Truck Air System and Brakes Screen (Torque Converter and Front Brake Cooling)
3054 Engine General Information
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Ventilation Blower Wheel - Inspect/Clean
793B Off-Highway Truck Engine Valve Lash and Bridge - Adjust
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Stopping the Engine if an Electrical Malfunction Occurs
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Relief Valve (Line)
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Flow Control and Relief Valve (Rear Axle Oil)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Boom Cylinder
793B Off-Highway Truck Circuit Breakers (EMS) - Reset
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Propel Electronic Control Module
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Transmission Oil Pump - Install
966G and 972G Wheel Loaders Power Train Duo-Cone Conventional Seals - Install
793B Off-Highway Truck Maintenance Interval Schedule
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Output Transfer Gears - Adjust
793B Off-Highway Truck Indicators
3054 Engine Fuel System
CP-563C and CS-563C Vibratory Compactors Engine Valve Lash - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Bucket Cylinder (Backhoe)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Ventilation Inlet Ducts - Inspect/Clean
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.