Parking Brake Control Cable - Adjust
Show/hide table
 | |
| Illustration 1 | g00911495 |
Parking Brake Control Assembly (1) Parking brake control knob. (2) Nut. (3) Bracket. (4) Bulkhead nuts. (A) Cable end. | |
Show/hide table
 | |
| Illustration 2 | g00911497 |
View B-B (5) Lever assembly. (6) Cotter pin. (7) Clevis pin. (8) Rod end. (9) Nut. (10) Bulkhead nuts. (11) Bracket. (C) Cable end with swivel joint. | |
- Extend the parking brake control cable until cable end (A) is all the way out. Cable end (A) is for parking brake control knob (1). Keep the parking brake control cable in this position during Step 3.
- With the parking brake cable and the parking brake linkage in the ENGAGED position, thread rod end (8) onto cable end (C). Thread rod end (8) onto cable end (C) until the hole in rod end (8) is in alignment with the hole in lever assembly (5). Turn rod end (8) clockwise for an additional ten full turns. Be sure that you align the hole in rod end (8) with the hole in lever assembly (5) .
- If necessary, reposition bulkhead nuts (10) on bracket (11) in order to correctly position rod end (8) in Step 3.
- Tighten nut (9) against rod end (8) to a torque of 8 ± 3 N·m (6 ± 2 lb ft).
- Install clevis pin (7), and cotter (6) .
- Position bulkhead nuts (4) on cable end (A) into bracket (3) .
- Tighten bulkhead nuts (4) to a torque of 38 ± 7 N·m (28 ± 5 lb ft).
- Thread nut (2) onto cable end (A). Thread parking brake control knob (1) onto cable end (A) .
- Thread nut (2) against parking brake control knob (1). Tighten nut (2) to a torque of 8 ± 3 N·m (6 ± 2 lb ft).
Caterpillar Information System:
3054 Engine Cylinder Block
789C Off-Highway Truck/Tractor Torque Converter
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Hydraulic System Oil Sample - Obtain
3054 Engine Connecting Rod
3500 Generator Set Engines Engine Design
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Differential
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Hydraulic System Oil Level - Check
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Hydraulic System Oil Filter - Replace
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Hydraulic System Oil - Change
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Piston and Rings - Two-Piece Piston
3054 Engine Piston and Rings
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Fan Drive System
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Indicators and Gauges - Test
AP-1050B and BG-245C Asphalt Pavers Leaving the Machine
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Differential and Bevel Gear
966G and 972G Wheel Loaders Service Brake Wear Indicator - Check
3054 Engine Crankshaft
3500 Generator Set Engines Engine Design
3500 Generator Set Engines Engine Design
3054 Engine Flywheel and Flywheel Housing Runout
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Machine Tiedown Information
3054 Engine Electric Starting Motor
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Gear Pump (Fan Drive)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Gear Motor (Fan Drive)