824G , 825G and 826G Landfill Compactor Caterpillar

Transmission Oil Sample - Obtain

Usage:

824G 4SN

Show/hide table

NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates.

Open the engine hood.

Show/hide table




Illustration 1	g00274455

Pull the cable in order to open the engine access door on the right side of the machine.

Show/hide table




Illustration 2	g00274453

Show/hide table




Illustration 3	g00534636

The sampling valve for the transmission oil is located next to the transmission hydraulic control valve. Use the sampling valve to obtain a sample of transmission oil.

Deliver the sample of transmission oil for analysis.

Close the engine access door and the engine hood.

Reference: See Operation and Maintenance Manual, "S·O·S Oil Analysis" and Special Publication, PEHP6001, "How To Take A Good Oil Sample" for information about obtaining a sample of the transmission oil.