Excavating with Bucket
Show/hide table
Illustration 1 | g00100569 |
- Lower the bucket to the ground. Position the bucket for a slight digging angle.
- Apply downward pressure to the bucket as the loader starts forward. Return the lift lever to HOLD when sufficient penetration is obtained.
- Maintain level cuts while you move forward by raising the bucket and lowering the bucket.
- When the bucket is loaded, tilt the bucket backward against the stops. Carry the loaded bucket for approximately 40 cm (15 inch) above the ground when you move to the dump area.
Caterpillar Information System:
928G Wheel Loader After Starting Engine
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Starting with Auxiliary Start Receptacle - If Equipped
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Detent Coil (Control Lever)
554 Forwarder and 574 Forwarder Engine Starting with Jump Start Cables
928G Wheel Loader Starting Below 0°C (32°F) with Thermal Starting Aid
928G Wheel Loader Starting Above 0°C (32°F)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Seat Adjustment and Seat Belt Inspection
120H and 135H Motor Graders Air System and Brakes Check Valve (Parking Brake Release)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Mounting and Dismounting
12H, 140H and 160H Motor Graders Air System and Brakes Stop Light Air Pressure Switch
143H and 163H Motor Graders Air System and Brakes Pressure Switch (Brake Air) (Parking Brake)
143H and 163H Motor Graders Air System and Brakes Pressure Switch (Low Brake Air)
938G Wheel Loader and IT38G Integrated Toolcarrier Parking Brake
928G Wheel Loader Secondary Steering
928G Wheel Loader Accelerator Control
966G and 972G Wheel Loaders Logging Fork Clamp
966G and 972G Wheel Loaders Operating Technique Information
966G and 972G Wheel Loaders Bucket Loading from a Stockpile
966G and 972G Wheel Loaders Bucket Loading Hauling Units
966G and 972G Wheel Loaders Bucket Loading from a Bank
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Specifications
928G Wheel Loader Walk-Around Inspection
12H, 140H and 160H Motor Graders Air System and Brakes Parking Brake Solenoid Valve
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Fuses - Replace