Usage:
10Mar2017 |
(Revised 24Apr2017) |
After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL LIFT PUMP ON CERTAIN E, F, AND F2 SERIES BACKHOE LOADERS |
|
1258 | PS53433 |
NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53433" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
NOTE: | This Revised Service Letter replaces the 10Mar2017 (Revised 18Apr2017) Service Letter. Changes have been made to the SMCS code. The SMCS code did not load properly to SIS Web. |
TERMINATION DATE |
31Mar2019 |
PROBLEM
The existing lift pump can fail due to the motor brushes being contaminated and prematurely wearing on certain E, F, and F2 Series Backhoe Loaders. This will create low fuel pressure. If the existing lift pump fails, it can/will cause the engine to produce low power. |
AFFECTED PRODUCT
Model | Identification Number |
*******Group 1******* | |
416F | LWT00150-00785 |
420F | LKH00150-00151, 153-516 LTG00150-01210, 1215-2342 |
422F | LRH00150-02375 |
428F | LBH00150-05614, 33976 SJW00150-00425, 430-707 |
430F | LDY00150-00281 LNH00150-00208 |
432F | LNR00150-00754, 756-1287 SEJ00150-00445, 447-824, 833-895 |
434F | FLY00150-00263 LDH00150-00947 |
444F | FBN00150-00246 LJJ00150-00528 |
*******Group 2******* | |
416F 2 | LBF01000-02082 LYA00150-00388 |
420F 2 | LBS00150-00387 LYB00150-00466, 468-545 |
420F 2 IT | LYC00150-00419, 421, 423-446 |
422F 2 | LYF00150-00340, 342-820 |
428F 2 | LYG00150-00696, 711-1931 |
430F 2 | LYD00150-00205 |
430F 2 IT | LYE00150-00205 |
432F 2 | LYJ00150-00611 |
434F 2 | LYK00150-00343 |
444F 2 | LYL00150-00375 |
*******Group 3******* | |
416E | SHA00116-07176, 7178-7363, 72107 |
416E OEM | GRR00103-00365, 368-380, 383-384, 386-388, 2000-2037, 3000-3056, 4000-4033, 5000-5008, 5010-5035, 5037-5135 NBE00150-00199 |
416E ST | BWC00150-00159, 180-372 LMS00151-02599 |
420E | HLS00210-08370 KMW00150-03299 |
422E | DSK00150-00302, 304-305, 307-308, 316-317, 319-328, 332-333, 336, 338-340, 349-652 HBE00240-01406, 1600-2951 MAW00150-01825 |
428E | DPH00150-00687, 689-4497 DXC00150-00316, 322, 324, 326, 337-339, 343-421, 424, 427-428, 430-448, 450, 452-803 SNL00150-02073, 2200-5515 |
430E | DDT00220-00907 EAT00230-01473 |
432E | BXE00188, 260-2060, 2200-4598 JBA00150-02688 RXS00150-00196, 198-199, 202-545 |
434E | FSH00280-00830, 900-1625 SEF00150-00288, 319-624 SJL00150-00398, 426-698, 700-752 SXB00150-00177, 186-210, 215-251, 610 |
442E | EME00150-00261 GKZ00290-00511, 600-825 PCR00150-00162, 164-183 |
444E | HXB00150-00154, 157-175 LBE00310-00498, 600-805 NBA00150-00417 |
*******Group 4******* | |
416E | CBD00940-10777 MFG00150-00151, 1501-5050, 6001-14422 |
PARTS NEEDED
Qty |
Part Number | Description |
*******Group 1******* | ||
4 | 3J1907 | SEAL-O-RING-STOR |
1 | 5014461 | FILTER GP-FUEL |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 2******* | ||
4 | 3J1907 | SEAL-O-RING-STOR |
1 | 5014461 | FILTER GP-FUEL |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 10% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 3******* | ||
4 | 3J1907 | SEAL-O-RING-STOR |
1 | 5014461 | FILTER GP-FUEL |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 4******* | ||
4 | 3J1907 | SEAL-O-RING-STOR |
1 | 5014461 | FILTER GP-FUEL |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Replace the failed lift pump with a new 501-4461 Fuel Filter Group. This pump has a brushless motor. Note: Correct cleanliness of the fuel is still important. Refer to the machine Operation and Maintenance Manual for details of how to maintain the fuel system to the correct standard. Note: On E-series machines, where the pump is mounted low down on the chassis rail, the customer may wish to remove the glass bowl from the filter. This will give a greater ground clearance. Note: Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. Refer to the Operation and Maintenance Manual "Safety Section". Refer to the Service Manual if/as necessary. |