Usage:
7L8708 For D346 (39J1-39J412) And D348 (36J1-36J362) Engines
(1) Length of terminal lever ... 3.5 in.(88.9 mm)
(2) Angle of terminal lever to vertical ... 12 to 22°
(3) Link length: refer to testing and adjusting.
(4) Stop adjusting screw: refer to testing and adjusting.
(5) Clearance between stop plate and stop bolt ... .020 in.(0.51 mm)
(6) Length of lower lever ... 6.0 in.(152.4 mm)
2N503 For D346 (39J413-Up), D348 (36J363-Up) And D349 (61P1-Up) Engines
(1) Length of terminal lever ... 2.25 in.(57.15 mm)
(2) Angle of terminal lever to horizontal ... 30°
(3) Length of lever ... 3.5 in.(88.9 mm)
(4) Angle of lever to horizontal ... 30°
(5) Diameter of shaft journal ... .7300 ± .0005 in.(18.54 ± 0.01 mm)
Bearing bore ... .734 to .735 in.(18.64 to 18.67 mm)
Clearance between journal and bearing ... .0035 to .0065 in.(0.09 to 0.17 mm)
(6) Bore in bearing ... .627 to .630 in.(15.92 to 16.00 mm)
Pinion journal diameter ... .622 to .624 in.(15.80 to 15.85 mm)
Clearance between journal and bearing ... .003 to .008 in.(0.08 to 0.20 mm)