1999/05/10 Caterpillar


Additional Serviceable Parts Available For Front Axle {3020}

Usage:


416C (1WR, 1XR, 4ZN, 5YN),
426C (1CR, 1ER, 1MR, 1NR, 1YR, 1ZR, 6XN, 7WN),
428C (8RN, 2CR),
436C (1FR, 1GR, 1PR, 1RR, 2AR, 2BR, 8TN, 9JN),
438C (1JR, 1TR, 2DR, 9KN) Backhoe Loaders


Illustration 1.
Shaft Assemblies on each side of the axle.

Additional service parts are available for the shaft assemblies for the 107-3722 Drive & Steering Axle. See Illustration 1.

The 130-3013 Shaft Assembly (right shaft) assembly is identified in Chart 1. The 130-3014 Shaft Assembly (left side) is identified in Chart 2.

Caterpillar Information System:

1999/05/10 Improved Throttle Lever Increases Service Life {1265}
1999/05/03 Revision To Special Instruction, SEHS9043, "Field Installation Of Valves For Scheduled Oil Sampling" Is Available {7542}
1999/05/03 Operation Of The Hydraulic Screed Counterbalance System {5051,5420}
1999/05/03 New Mounting Arrangement Used For Pulse Width Modulated Steering Sensor {4800}
1999/05/03 Improved Rotor Hood Side Disk Pivot Now Available {6635,5608}
1999/05/03 Identification Of Minifuses, Minifuse Blocks, And Minifuse Locks For Operator Station Instrument Panel {7451,1417}
1999/05/03 Improved Gas Springs Increase Service Life {7254}
1999/05/03 Electroplated Axle Mounting Hardware Requires Changes In Torque Procedure And Specifications {3268}
1999/05/03 Corrections To Electrical System Schematics SENR6735, SENR6737, SENR5985, And SENR1229 {1400}
1999/05/03 Fully Hydraulic Brake System Now Standard Production {4251}
1999/05/03 Installation Procedure For The Fuel Injection Plate On The 914G/IT14G {1251}
1999/05/03 Correction To Engine Oil Change Interval {1348}
1999/05/10 Improved Idlers (D7R-D11R) and Improved Rollers (D9R, D11R) With Symmetrical Duo-Cone Seals Now Available {4159,4180}
1999/05/10 Corrections For Special Instruction REHS0082-01 And Special Instruction REHS0267 {3030,3124}
1999/05/10 Service Parts For Electric Drive Pump In Secondary Drive System {5703,4324,4354}
1999/05/10 Incorrect Service Interval Specified For Battery, Battery Cable And Disconnect Switch {1402,1401,1411,7528}
1999/05/10 Incorrect psi Conversion Of Accumulator Precharge Pressure {5077}
1999/05/10 New Implement Control Groups Available With Numerous Enhancements {5700,5701,7620}
1999/05/10 8I-5949 Switch Assembly Can Be Serviced By Modifying The 6R-7916 Switch {4343,7332,1435}
1999/05/10 Maximum Allowable Tire Size Difference For Material Handlers And Telehandlers {4203}
1999/05/10 New Service Part For Pressure Reducing Valve O-Rings {5057}
1999/05/17 Verify Failed Control Module Before Replacement {7451,7490}
1999/05/17 New Transmission Arrangements Available For Parts Service {3030}
1999/05/17 New Manual Modulation Spool Prevents Sticking {3162,3167}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.