Usage:
D20D (9MG),
D25D (1HK),
D30D (3AJ),
D40D (2JJ),
D250D (6NG),
D300D (5MG),
D350D (9RF),
D400D (8TF),
D250E (5TN),
D300E (7FN),
D350E (9LR),
D400E (2YR) Articulated Trucks
- SUPPLEMENT: JUNE 22, 1998
Service Magazine SEPD0403, Article 3, Page 2, February 9, 1998; "Improved Limited Slip Differential Thrust Washers And Hardened Discs Improve Service Life."
See Service Magazine SEPD0422 Article 21, Page 13 titled "Supplement to 'Improved Limited Slip Differential Thrust Washers And Hardened Discs Improve Service Life'".
--------------- END SUPPLEMENT ---------------
Description of Change: New thrust discs with hardened teeth are now used to extend the life of the discs. Also, new hardened thrust washers with accompanying brass wear washers are now used to reduce wear into the case of limited slip differentials.
Adaptable To: This change is effective with D25D (1HK676), D30D (3AJ415), D250E (5TN1092), D300E (7FN525), D350E (9LR334), and D400E (2YR544) Articulated Trucks, and is adaptable to earlier machines including D20D (9MG), D40D (2JJ), D250D (6NG), D300D (5MG), D350D (9RF), D400D (8TF) Articulated Trucks.
To adapt the new thrust washer design to earlier machines, the existing case and cover need to be modified. The illustrations and dimension charts below show the required modifications for the appropriate models.
Illustration 1. Typical top view of case with alterations.
Illustration 2. Section A-A view of typical case with alterations.
NOTE: Dimension (C) is the depth of the counterbore with diameter dimension (E) past the bottom surface of the large counterbore with depth dimension (B).
Illustration 3. Top view of typical cover with alterations.
Illustration 4. Section B-B View of typical cover with alterations.
NOTE: Dimension (J) is the depth of the counterbore with diameter dimension (M) past the bottom surface of the large counterbore with diameter dimension (G).
Illustration 5. Detail Y. Typical relief groove. (Use either alternative).
D25D Front, D30D, D40D, D400D, D350E Front, D400E Dimensions For Modification
D20D, D250D, D300D, D250E Dimensions For Modification
D25D Rear, D350D, D400D, D300E, D350E Center And Rear Dimensions For Modification