Usage:
1. Attach a lifting sling and a hoist to the electric starting motor, as shown. Exert slight tension to the lifting sling. Put identification marks on the wires that are connected to the electric starting motor and solenoid for installation purposes. Remove nut (1) and two wire assemblies (2) from the starter solenoid. Remove nut (4) and three wire assemblies (3) from the electric starting motor.
2. Remove three bolts (5) that secure the electric starting motor to the engine. Remove electric starting motor (6) and the gasket from the engine. The weight of the electric starting motor is 27 Kg (60 lb).
NOTE: The following Steps are to install the electric starting motor.
3. Attach a lifting sling and a hoist to the electric starting motor. Position the electric starting motor and the gasket to the engine. Install three bolts (5) that secure the electric starting motor to the engine.
4. Install two wire assemblies (2) and nut (1) to the electric starting motor solenoid. Install three wire assemblies (3) and nut (4) to the electric starting motor. Remove the lifting sling.