Oil Pan
Usage:
Remove Oil Pan
1. Remove the oil from the engine.
2. Remove bolts (1) and remove oil pan (2).
Install Oil Pan
1. Inspect the gasket for the oil pan. Install a new gasket if needed.
2. Put oil pan in position on the engine and install the bolts that hold it in place. Tighten the bolts to a torque of 17 ± 3 lb. ft. (23.0 ± 4.1 N·m).
3. Fill the engine with oil to the correct level.
Caterpillar Information System:
3208 TRUCK ENGINE Fuel Filter Base
3208 TRUCK ENGINE Oil Filter Base And Engine Oil Cooler
3208 TRUCK ENGINE Starter
3208 TRUCK ENGINE Exhaust Manifold
3208 TRUCK ENGINE Fuel Injection Pump Housing
3208 TRUCK ENGINE Governor
3208 TRUCK ENGINE Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE Fuel Transfer Pump
3208 TRUCK ENGINE Fuel Injection Pumps
3208 TRUCK ENGINE Shutoff Housing
3208 TRUCK ENGINE Check Valve And Bypass Valve
3208 TRUCK ENGINE Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE Crankshaft Main Bearings
3208 TRUCK ENGINE Connecting Rod Bearings
3208 TRUCK ENGINE Water Pump
3208 TRUCK ENGINE Water Temperature Regulators
3208 TRUCK ENGINE Valve Covers
3208 TRUCK ENGINE Crankcase Ventilator Valve
3208 TRUCK ENGINE Rocker Shafts And Push Rods
3208 TRUCK ENGINE Rocker Shafts
3208 TRUCK ENGINE Fuel Injection Nozzles
3208 TRUCK ENGINE Cylinder Heads
3208 TRUCK ENGINE Valve Lifters
3208 TRUCK ENGINE Pistons