Exhaust Manifold
Usage:
Remove Exhaust Manifold
1. Remove bolts (1) and remove exhaust manifold (2).
Install Exhaust Manifold
1. Put gaskets and manifold in position on the cylinder block.
2. Put 9M3710 Anti-Seize Compound on the bolt threads and install them. Tighten the bolts to a torque of 32 ± 5 lb. ft. (43.4 ± 6.8 N·m).
NOTE: Locks must be bent on a flat side of the bolt head. Bolts must be turned no more than 30° of a turn (in the direction of increased torque only) for the alignment of the locks with a flat side of the bolt head.
Caterpillar Information System:
3208 TRUCK ENGINE Fuel Injection Pump Housing
3208 TRUCK ENGINE Governor
3208 TRUCK ENGINE Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE Fuel Transfer Pump
3208 TRUCK ENGINE Fuel Injection Pumps
3208 TRUCK ENGINE Shutoff Housing
3208 TRUCK ENGINE Check Valve And Bypass Valve
3208 TRUCK ENGINE Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Fuel Injection Lines
3208 TRUCK ENGINE Air Cleaner
3208 TRUCK ENGINE Disassembly And Assembly
3208 TRUCK ENGINE Starter
3208 TRUCK ENGINE Oil Filter Base And Engine Oil Cooler
3208 TRUCK ENGINE Fuel Filter Base
3208 TRUCK ENGINE Oil Pan
3208 TRUCK ENGINE Crankshaft Main Bearings
3208 TRUCK ENGINE Connecting Rod Bearings
3208 TRUCK ENGINE Water Pump
3208 TRUCK ENGINE Water Temperature Regulators
3208 TRUCK ENGINE Valve Covers
3208 TRUCK ENGINE Crankcase Ventilator Valve
3208 TRUCK ENGINE Rocker Shafts And Push Rods
3208 TRUCK ENGINE Rocker Shafts