2-WD Wheel Bearing Adjustment Procedure
Usage:
(1) Apply 2S-3230 Bearing Lubricant to bearings (1) at assembly.
(2) Tighten adjusting nut (2) while rotating the wheel until there is a slight bind to be sure all bearing surfaces are in contact. Back off the adjusting nut (2) to the nearest slot or until the wheel rotates freely and end play is 0.025 to 0.25 mm (.001 to .010 in). Install the cotter pin.
Caterpillar Information System:
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Steering Crossover Relief Valve
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Front Axle Pivot
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Front Axle Assembly
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Front Axle Toe-In Adjustment Procedure
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Priority Flow Divider Valve Group
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Metering Pump (Steering)
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Steering Control Group
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Steering Cylinder
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Introduction
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS TRANSMISSION Testing And Adjusting
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS TRANSMISSION Systems Operation
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS DIFFERENTIAL, Testing & Adjusting
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Wheel And Tire Group
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Systems Operation
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS STEERING SYST Testing And Adjusting
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS HYDRAULIC SYS Systems Operation
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS HYDRAULIC SYS Testing And Adjusting
416B, 426B, 428B, 436B and 438B Backhoe Loaders Hydraulic System 416B, 426B, 428B, 436B and 438B Backhoe Loaders Hydraulic System
416, 426, 428, 436 And 438 Series II Backhoe Loaders Electrical System 416, 426, 428, 436 And 438 Series II Backhoe Loaders Electrical System
416B, 426B, 428B,436B, AND 438B BACKHOE LOADERS MACHINE SYST Loader Implement Control Group
416B, 426B, 428B,436B, AND 438B BACKHOE LOADERS MACHINE SYST Backhoe & Stabilizer Implement Control Valve
416B, 426B, 428B,436B, AND 438B BACKHOE LOADERS MACHINE SYST Implement Pump
416B, 426B, 428B,436B, AND 438B BACKHOE LOADERS MACHINE SYST Brake Control Valve
416B, 426B, 428B,436B, AND 438B BACKHOE LOADERS MACHINE SYST Brake Control Valve Switches