Crankshaft Pulley
Usage:
(1) Torque for bolt holding hub to crankshaft to ... 230 ± 20 lb. ft.(307 ± 25 N·m)
Hit bolt with hammer and again tighten bolt to ... 230 ± 20 lb. ft.(307 ± 25 N·m)
NOTE: Install washer with the maximum flat area next to the hub.
Caterpillar Information System:
3306 DIESEL TRUCK ENGINE Main Bearings And Connecting Rod Bearings
3306 DIESEL TRUCK ENGINE Bearing Surface (Journal) For Connecting Rods
3306 DIESEL TRUCK ENGINE Bearing Surface (Journal) For Main Bearings
3306 DIESEL TRUCK ENGINE Crankshaft
3306 DIESEL TRUCK ENGINE Connecting Rod
3306 DIESEL TRUCK ENGINE Pistons And Rings
3306 DIESEL TRUCK ENGINE Pistons And Rings (With Keystone Piston Ring Groove)
3306 DIESEL TRUCK ENGINE Cylinder Liner Projection (Counterbored Block)
3306 DIESEL TRUCK ENGINE Cylinder Liner Projection (With Spacer Plate)
3306 DIESEL TRUCK ENGINE Cylinder Liner
3306 DIESEL TRUCK ENGINE Cylinder Block (With Spacer Plate)
3306 DIESEL TRUCK ENGINE Cylinder Block (Counterbored Block)
3306 DIESEL TRUCK ENGINE Flywheel Ring Gear
3306 DIESEL TRUCK ENGINE Flywheel Housing Tightening
3306 DIESEL TRUCK ENGINE Flywheel Runout
3306 DIESEL TRUCK ENGINE Flywheel Housing Runout
3306 DIESEL TRUCK ENGINE Flywheel Housing Bore
3306 DIESEL TRUCK ENGINE Alternators
3306 DIESEL TRUCK ENGINE Alternator Regulator
3306 DIESEL TRUCK ENGINE Starter Motors 9L3597 12V (Delco-Remy Number 1114129), 7G9132 12V (Delco-Remy Number 1114773)
3306 DIESEL TRUCK ENGINE Starter Motors
3306 DIESEL TRUCK ENGINE Starter Solenoids
3306 DIESEL TRUCK ENGINE Starter Solenoid 9S7976 24V (Prestolite Number SAT-4103)
3306 DIESEL TRUCK ENGINE Starter Magnetic Switches 5L5886 12V (Delco-Remy Number 0001486)