Pistons And Rings
Usage:
Make reference to GUIDELINE FOR REUSABLE PARTS; PISTONS AND CYLINDER LINERS, Form No. SEBF8001.
(4) Bore in piston for pin ... 1.7006 ± .0003 in.(43.195 ± 0.008 mm)
Clearance between pin and bore in piston ... .0003 to .0013 in.(0.008 to 0.033 mm)
Maximum permissible clearance (worn) ... .002 in.(0.05 mm)
Pin diameter ... 1.6998 ± .0002 in.(43.175 ± 0.005 mm)
NOTE: When installed in the engine, the "V" mark on top of the piston must be in alignment with the "V" mark on the cylinder block.
Caterpillar Information System:
3306 DIESEL TRUCK ENGINE Pistons And Rings (With Keystone Piston Ring Groove)
3306 DIESEL TRUCK ENGINE Cylinder Liner Projection (Counterbored Block)
3306 DIESEL TRUCK ENGINE Cylinder Liner Projection (With Spacer Plate)
3306 DIESEL TRUCK ENGINE Cylinder Liner
3306 DIESEL TRUCK ENGINE Cylinder Block (With Spacer Plate)
3306 DIESEL TRUCK ENGINE Cylinder Block (Counterbored Block)
3306 DIESEL TRUCK ENGINE Water Temperature Regulators
3306 DIESEL TRUCK ENGINE V-Belt Tension Chart
3306 DIESEL TRUCK ENGINE Water Pump
3306 DIESEL TRUCK ENGINE Oil Breather Cap
3306 DIESEL TRUCK ENGINE Engine Oil Pressure
3306 DIESEL TRUCK ENGINE Oil Filter
3306 DIESEL TRUCK ENGINE Connecting Rod
3306 DIESEL TRUCK ENGINE Crankshaft
3306 DIESEL TRUCK ENGINE Bearing Surface (Journal) For Main Bearings
3306 DIESEL TRUCK ENGINE Bearing Surface (Journal) For Connecting Rods
3306 DIESEL TRUCK ENGINE Main Bearings And Connecting Rod Bearings
3306 DIESEL TRUCK ENGINE Crankshaft Pulley
3306 DIESEL TRUCK ENGINE Flywheel Ring Gear
3306 DIESEL TRUCK ENGINE Flywheel Housing Tightening
3306 DIESEL TRUCK ENGINE Flywheel Runout
3306 DIESEL TRUCK ENGINE Flywheel Housing Runout
3306 DIESEL TRUCK ENGINE Flywheel Housing Bore
3306 DIESEL TRUCK ENGINE Alternators