Cylinder Liner
Usage:
NOTE: Make reference to GUIDELINE FOR REUSABLE PARTS; PISTONS AND CYLINDER LINERS, Form No. SEBF8001.
(1) Bore in liner (new) ... 4.751 ± .001 in.(120.68 ± 0.025 mm)
Use again maximum bore when measured near upper end of the wear surface of the cylinder liner ... 4.755 in.(120.78 mm)
(2) Thickness of flange on liner ... .4048 ± .0008 in.(10.282 ± 0.020 mm)
(3) Filler band.
Cylinder Liner Installation
Put liquid soap on bottom liner bore in block, on grooves in lower liner, and on O-rings. Install O-rings on liner. Put filler band (3) in engine oil for a moment and install on liner. Immediately install liner in cylinder block (before expansion of filler band).
Caterpillar Information System:
3306 DIESEL TRUCK ENGINE Cylinder Block (With Spacer Plate)
3306 DIESEL TRUCK ENGINE Cylinder Block (Counterbored Block)
3306 DIESEL TRUCK ENGINE Water Temperature Regulators
3306 DIESEL TRUCK ENGINE V-Belt Tension Chart
3306 DIESEL TRUCK ENGINE Water Pump
3306 DIESEL TRUCK ENGINE Oil Breather Cap
3306 DIESEL TRUCK ENGINE Engine Oil Pressure
3306 DIESEL TRUCK ENGINE Oil Filter
3306 DIESEL TRUCK ENGINE Oil Pump (9L6944)
3306 DIESEL TRUCK ENGINE Turbocharger (Schwitzer E Models)
3306 DIESEL TRUCK ENGINE Turbocharger (AiResearch T12)
3306 DIESEL TRUCK ENGINE Turbocharger Impeller Installation (AiResearch Only)
3306 DIESEL TRUCK ENGINE Cylinder Liner Projection (With Spacer Plate)
3306 DIESEL TRUCK ENGINE Cylinder Liner Projection (Counterbored Block)
3306 DIESEL TRUCK ENGINE Pistons And Rings (With Keystone Piston Ring Groove)
3306 DIESEL TRUCK ENGINE Pistons And Rings
3306 DIESEL TRUCK ENGINE Connecting Rod
3306 DIESEL TRUCK ENGINE Crankshaft
3306 DIESEL TRUCK ENGINE Bearing Surface (Journal) For Main Bearings
3306 DIESEL TRUCK ENGINE Bearing Surface (Journal) For Connecting Rods
3306 DIESEL TRUCK ENGINE Main Bearings And Connecting Rod Bearings
3306 DIESEL TRUCK ENGINE Crankshaft Pulley
3306 DIESEL TRUCK ENGINE Flywheel Ring Gear
3306 DIESEL TRUCK ENGINE Flywheel Housing Tightening