12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS Caterpillar

Start By:

1. Remove the steering wheel. Remove six screws (1) and remove hood (4).

2. Remove two bolts (3) and retainer (2). Remove retainer (5) from the steering column.

3. Identify and disconnect five oil lines (8) from steering pump (7).

4. Remove two bolts (6) and remove steering pump (7) from the console.

NOTE: The following steps are for installation of the steering pump.

5. Position steering pump (7) in the console. Install two bolts (6).

6. Position retainer (5) over the steering column. Install retainer (2) and two bolts (3).

7. Install five oil lines (8) on steering pump (7).

8. Place hood (4) on the console and install six screws (1).

9. Install the steering wheel.