Usage:
SEBE7488
December 10, 2000
U-323
A-233
O-265
Priority |
A NEW FLYWHEEL NEEDS TO BE INSTALLED ON CERTAIN G3304 AND G3306 GAS ENGINES |
|
1156 |
PI30068 |
NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI30068" as the Part number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI30068" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
COMPLETION DATE |
TERMINATION DATE |
June 30, 2001 |
December 31, 2001 |
PROBLEM
A new flywheel needs to be installed on certain G3304 and G3306 Gas Engines. The ignition timing marks stamped on the circumference of the flywheel may have been indexed incorrectly and the ignition time may not be set properly.
AFFECTED PRODUCT
G3306 07Y7746-7748, 7750, 7751, 7754, 7756-7759, 7761-7764, 7766-7768, 7770, 7772, 7774, 7776
G3304 37Y3976, 3977, 3980-3985, 3987-3989, 3991, 3993, 3995-3997, 4000-4002
PARTS NEEDED
1 - 4W6805 Flywheel Assembly
ACTION REQUIRED
Check to see if the timing marks are in the correct location by pinning the flywheel and removing the large pipe plug on the left side of the flywheel housing. If the timing mark is setting on 0 (zero) +/- 2 degrees, the flywheel is okay. If the number of degrees is larger than +/- 2 degrees the flywheel will need to be replaced.
OWNER NOTIFICATION
U.S. and Canadian owners will receive the attached Owner Notification.
SERVICE CLAIM ALLOWANCES
Caterpillar |
Dealer Suggested |
Customer Suggested |
|||
Parts |
Labor Hrs. |
Parts |
Labor Hrs. |
Parts |
Labor Hrs. |
100% |
1 |
0 |
0 |
0 |
0 |
NOTE: This is a 1-hour job. NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report |
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach. (1-Owner Notification)
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY -
A New Flywheel Needs To Be InstalledMODELS INVOLVED -
G3304 and G3306 Gas EnginesDear Caterpillar Product Owner:
A new flywheel needs to be installed on certain G3304 and G3306 Gas Engines. The ignition timing marks stamped on the circumference of the flywheel may have been indexed incorrectly and the ignition time may not be set properly.
New flywheel assemblies need to be installed on the products listed below.Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated December 10, 2000 when scheduling this service. You will not be charged for the service performed.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to December 10, 2000 Service Letter