Service Management Guide And Service Methods And Equipment Guide Canceled{0374}
Usage:
The Service Management Guide, Form SEBF3020, and the Service Methods and Equipment Guide, Form SEBF2000, have been discontinued. No further orders will be accepted or updates issued for these two publications. New guides, more in keeping with modern service and management techniques, are available. The Engine and Component Reconditioning Guide and Undercarriage Reconditioning Guide, offer more current information covering procedures, personnel, equipment and tools to fit today's age of specialization. SMCS Code Structure Information, which is currently included in the Service Management Guide will continue to be updated and distributed with the Service Information Retrieval System (SIRS).
Caterpillar Information System:
1982/10/04 Changes To Direct Inquiry SIRS{0374}
1982/09/27 Electrical System Voltage Must Be Limited To A Maximum Of 40 Volts With Woodward Model 2301 Governors{1289}
1982/09/27 New Thrust Discs Used In Planetary Groups, Winch Groups{3187,5165,3176}
1982/09/27 New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27 New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27 Screen Added To Oil Lines At Inlet Of Brake And Torque Converter Oil Cooler{1366,1365,1375,1376,3103,3154,3179,4257,4304,5057,5068}
1982/09/27 Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27 New Front Suspension Group Uses Stronger Rod Assembly{7201}
1982/09/20 Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20 Check Valve Group Necessary When Feller Bunchers Are Used{5561,5472,5050}
1982/09/20 Induction Bearing Heater Available{0627}
1982/09/20 New Oil Supply Tube For Fan Drive Makes Installation Easier{1359,1307}
1982/10/04 Planned Engine Repairs{0374,0375,1318,0372}
1982/10/04 New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04 New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04 New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/11 Stronger Guard For Transmission Control Shift Cylinder{3163,3167}
1982/10/11 Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11 Indications From 6V3100 Timing Indicator Group Must Be Corrected For Some Applications{0651,1250,1156,1157}
1982/10/11 Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11 Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11 New Fasteners Used For Fuel Injection Lines{1252}
1982/10/11 Extended Storage Procedures{1000,3300}
1982/10/11 Hose Presses Can Now Be Used To Service 9.52 mm (.375") JIC Couplings{0623,0624,7554}