1982/10/04 Caterpillar

Changes To Direct Inquiry SIRS{0374}

Usage:

Since September 1980, U.S. and Canadian dealers have had the capability of on-line computer access to the Service Information Retrieval System (SIRS). A new method of SIRS inquiry is now available. This new method allows dealers to inquire directly to the SIRS computer data base. Turnaround time for dealer inquiries should be improved.

The following major improvements have been made to Direct Inquiry SIRS:

1. The inquiry limitation of a maximum range of ten component codes has been eliminated. A single inquiry can now obtain a much wider range of literature references.

2. Product Update information is available by the addition of an optional field to the inquiry screen.

3. An optional Literature Abbreviation field has been added to the inquiry screen. Literature information on a single publication type, such as Service Magazine or Parts Book, can be obtained.

4. A Range of Years field has been added as an option to the inquiry screen. Literature references for a specific period of time (such as 1978 to 1982) can be obtained.

Complete information on this system is contained in the Direct Inquiry SIRS User Instructions, Form SEBD3459. Additional copies of these instructions can be obtained by placing a literature order on the Dealer Terminal System.

Caterpillar Information System:

1982/09/27 Electrical System Voltage Must Be Limited To A Maximum Of 40 Volts With Woodward Model 2301 Governors{1289}

1982/09/27 New Thrust Discs Used In Planetary Groups, Winch Groups{3187,5165,3176}

1982/09/27 New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}

1982/09/27 New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}

1982/09/27 Screen Added To Oil Lines At Inlet Of Brake And Torque Converter Oil Cooler{1366,1365,1375,1376,3103,3154,3179,4257,4304,5057,5068}

1982/09/27 Do Not Use A Wire Brush On Fuel Nozzles{1254}

1982/09/27 New Front Suspension Group Uses Stronger Rod Assembly{7201}

1982/09/20 Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}

1982/09/20 Check Valve Group Necessary When Feller Bunchers Are Used{5561,5472,5050}

1982/09/20 Induction Bearing Heater Available{0627}

1982/09/20 New Oil Supply Tube For Fan Drive Makes Installation Easier{1359,1307}

1982/09/20 Dial Bore Gauge And Size Setting Fixture Available{0653}

1982/10/04 Service Management Guide And Service Methods And Equipment Guide Canceled{0374}

1982/10/04 Planned Engine Repairs{0374,0375,1318,0372}

1982/10/04 New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}

1982/10/04 New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}

1982/10/04 New Fuel Nozzle Test Sheet Available{0651,1254}

1982/10/11 Stronger Guard For Transmission Control Shift Cylinder{3163,3167}

1982/10/11 Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}

1982/10/11 Indications From 6V3100 Timing Indicator Group Must Be Corrected For Some Applications{0651,1250,1156,1157}

1982/10/11 Bulged Capsule-Type Fuel Nozzles{1254}

1982/10/11 Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}

1982/10/11 New Fasteners Used For Fuel Injection Lines{1252}

1982/10/11 Extended Storage Procedures{1000,3300}