CP-533 CS-533 VIBRATORY COMPACTORS PROPULSION SYSTEM Caterpillar

Output ... 91.1 liter/min (24.05 U.S. gpm)

Test At Half Speed

Output ... 45.8 liter/min (12.08 U.S. gpm)

Output ... 45.4 liter/min (11.98 U.S. gpm)

Rear Propulsion Pump

Rotation is clockwise when seen from drive end

(2) Type of pump ... Piston

Displacement ... 55.0 cm³/rev (3.36 in³/rev)

For test, use SAE 10W oil at 65°C (150°F)

Test At Full Speed

Output ... 120.4 liter/min (31.8 U.S. gpm)

Output ... 119.6 liter/min (31.6 U.S. gpm)

Test At Half Speed

Output ... 59.8 liter/min (15.80 U.S. gpm)

Output ... 59.4 liter/min (15.7 U.S. gpm)

(3) Torque for bolts ... 65 N·m (48 lb ft)

(4) Torque for multi-function valve ... 90 N·m (65 lb ft)

(5) Torque for bolts ... 13.5 N·m (10 lb ft)

(6) Torque for bolts ... 16 N·m (12 lb ft)

(7) Torque for bolts ... 8 N·m (6 lb ft)

(8) Torque for bolts ... 100 ± 15 N·m (75 ± 11 lb ft)

NOTE: Apply 6V4876 Molykote Paste Lubricant to the splines of the pump and coupling at assembly.

(9) Torque for bolts ... 105 N·m (75 lb ft)

(10) Torque for bolts ... 100 ± 15 N·m (75 ± 11 lb ft)

(11) Torque for locknut ... 46 to 55 N·m (34 to 41 lb ft)

(12) Torque for screws ... 13.5 N·m (10 lb ft)

(13) Torque for locknut ... 27 to 40 N·m (20 to 30 lb ft)

Propulsion Pump Cross Section

(14) Torque for screws ... 13.5 N·m (10 lb ft)

(15) Torque for bolts ... 32 N·m (24 lb ft)

(16) Torque for bolts ... 13.5 N·m (10 lb ft)

(17) Torque for nuts ... 24 N·m (18 lb ft)

Multi-Function Valve

(18) Torque for bypass actuator nut ... 41 N·m (30 lb ft)

(19) Pressure setting for main relief valves ... 41 350 to 46 850 kPa (6000 to 6800 psi)

(20) Torque for nut ... 16 N·m (12 lb ft)

Charge Relief Valves

(11) Torque for locknut ... 46 to 55 N·m (34 to 41 lb ft)

(21) Pressure setting for pump charge relief valves ... 2756 ± 138 kPa (400 ± 20 psi)

Neutralizer Valve

(22) Neutralizer valve coil resistance ... 31 ohms