Fuel Priming Pump - Remove and Install
- Turn the fuel supply to the OFF position.
Show/hide table
Illustration 1 g06367296 - Disconnect hose assemblies (1) and (2).
- Disconnect harness assembly (4).
- Remove bolts (5).
- Remove fuel priming pump (3).
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install fuel priming pump (3) in the reverse order of removal.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems System Pressure - Release
G3512 Generator Set Engine Exhaust Temperature Sensor - Remove and Install - Right-Hand Turbocharger
C175 Petroleum Engine Fuel Injection Pump
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Specifications
Procedure to Replace Upper Front Window on All Next Generation Hydraulic Excavators {7310} Procedure to Replace Upper Front Window on All Next Generation Hydraulic Excavators {7310}
New Travel Motor Drain Hose Routing Is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057, 5058} New Travel Motor Drain Hose Routing Is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057, 5058}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Track Adjusters - Install
G3512 Generator Set Engine Exhaust Temperature Sensor - Remove and Install - Left-Hand Turbocharger
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Relief Valve (Swing) - Test and Adjust
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Front Idler and Recoil Spring - Install
120 and 120 AWD Motor Grader Safety Messages
C175 Petroleum Engine Fuel System Operation
C175-16 Petroleum Engines Fuel Pump (High Pressure) - Remove and Install
G3500H 60Hz Generator Sets Engine Oil Level - Check
3512C and 3512E Engines Engine Idle Reduction System Sensor Supply - Test
C175 Petroleum Engine Valve Mechanism - Hydraulic Lash Adjusters
C175 Petroleum Engine Cooling System Operation
C175 Petroleum Engine Fuel System Inspection
C175 Petroleum Engine Fuel Rail Pressure - Release
C175 Petroleum Engine Valve Lash - Adjust - Hydraulic Lash Adjusters
C175 Petroleum Engine Aftertreatment SCR System - Decommission
G3512 Generator Set Engine Camshaft Speed Sensor - Remove and Install
G3500H 60Hz Generator Sets Coolant Sample (Level 1) - Obtain