Model View Illustrations
The following model views display typical features of the generator sets that are described in this manual. The operator should become familiar with the locations of these items. Due to individual applications, your generator set may appear different from the illustrations.
Show/hide table
Illustration 1 | g03708978 |
Typical example of the right side of a generator set with an enclosure and a fuel tank base (1) Control Panel (2) Generator (3) Engine Air Cleaner (4) Coolant Filler Cap |
Show/hide table
Illustration 2 | g03724619 |
Typical example of the left side of a generator set with an enclosure and a fuel tank base (5) Engine Oil Filler Cap (6) Engine Oil Level Gauge (dipstick) (7) Fuel Filter (8) Engine Oil Filter |
Show/hide table
Illustration 3 | g06309672 |
Top view of a fuel tank and base Fuel tanks will vary. Items on the fuel tank have labels. (9) Remote Fuel Return for connection to an auxiliary fuel tank (10) Remote Fuel Supply for connection to an auxiliary fuel tank (11) Fuel Level Switch (12) Auxiliary port for fuel tank cleaning (13) Fuel Filler (14) Fuel Level Gauge (15) Fuel Supply to engine (16) Fuel Return from engine |
Caterpillar Information System:
G3512 Gas Engine Electric Starting Motor
320D3 Hydraulic Excavator Machine Systems Accumulator - Remove and Install
320D3 and 323D3 Excavators Systems Electronic Control Module
C9.3B Engines Inlet Manifold Air Pressure Sensor
323D3 Hydraulic Excavators Engine Supplements Water Temperature Regulator - Remove and Install
C9.3B Engines Atmospheric Pressure Sensor
320D3 and 323D3 Excavators Systems Electrical Output Components
320D3 Hydraulic Excavator Machine Systems Pilot Valve (Travel) - Assemble
320D3 Hydraulic Excavator Machine Systems Swivel - Remove and Install
323D3 Hydraulic Excavators Engine Supplements Engine Oil Cooler - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Fuel Tank - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Boom Swing Cylinder - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Fuel Pump (High Pressure) - Remove and Install
C3.3 Generator Set Insulation - Test
797F Tier 4 Off-Highway Truck Engine Supplement Air Starting Motor - Remove and Install
320D3 and 323D3 Excavators Systems Gear Pump (Pilot)
320D3 and 323D3 Excavators Systems Hydraulic Filter (Pilot)
320D3 and 323D3 Excavators Systems Relief Valve (Pilot)
G3516H and G3520H Generator Set Engines Vibration Damper
320D3 and 323D3 Excavators Systems Oil Filter (Return) - Case Drain Filter
320D3 Excavators Power Receptacle - If Equipped
Installation Procedure of Right Side Camera on Certain 320 and 323 Next Generation Excavators {7348} Installation Procedure of Right Side Camera on Certain 320 and 323 Next Generation Excavators {7348}
320D3 Hydraulic Excavator Machine Systems Recoil Spring - Disassemble
320D3 Hydraulic Excavator Machine Systems Recoil Spring - Assemble